IP Desk Master -V2: Difference between revisions

Latest revision as of 16:06, 3 January 2025

IP Desktop station 1008400000 (IPDM-V2)

The device can operate in different modes. Set the mode according to the server the station should register to.

To use this device with Zenitel Connect Pro it must be factory defaulted. The device configuration is done from the Zenitel Connect Pro server.

Station specific configuration for the IP Master station:

This station is fully supported as from ICX-AlphaCom version 11.2.3.7

@@ Line 1: / Line 1: @@
-{{AEIS}}
+{{ACEIS}}
-[[File:1008000000 IP Desktop Master Station display Front.jpg|thumb|200px|IP Desktop station 1008400000 (IPDM-V2)]]
+[[File:IPDM-V2-P-newZ.png|thumb|400px|IP Desktop station 1008400000 (IPDM-V2)]]
 ==Getting Started==
 *[[Display Setup Menu (IP Stations)|Configuration from Display Menu]]
 ==Configuration==
-The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.
+The device can operate in [[Main Settings (IP Stations)|different modes]]. Set the mode according to the server the station should register to.
 * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
 * [[Adding station to existing system (Edge)|Edge mode]]
 * [[SIP Intercom - Web Interface|SIP mode]]
+{{note|To use this device with [[:Category:Zenitel Connect Pro|Zenitel Connect Pro]] it must be factory defaulted. The device configuration is done from the Zenitel Connect Pro server.}}
 Station specific configuration for the IP Master station:
 *[[Users_%26_Stations_(AlphaPro)#DAK|Customized text on navigation buttons - ICX-AlphaCom mode]]
 ==Restore Factory Defaults and Software Upgrade==
 *[[IP Master Station -V2 Restore Factory Defaults|Restore factory default settings]]
 *[[IP Master Station -V2 Software Upgrade|Upgrade via the station web interface]]