Actions

INCA 2.8 - Release Notes: Difference between revisions

From Zenitel Wiki
No edit summary
 
(33 intermediate revisions by 2 users not shown)
Line 1: Line 1:
=VSF-INCA 2.8=
== Release info ==
== Release info ==
'''Name:''' VSF-INCA <br>
'''Name:''' VSF-INCA <br>
'''Description:''' VSF-INCA is a firmware archive for all [[:Category:INCA Stations|INCA based Intercom stations]] including devices:
'''Description:''' VSF-INCA is a firmware archive for all [[:Category:Stations#INCA_stations|INCA based Intercom stations]] including devices:
'''IP Desktop Master Station''', '''IP Substation''', '''IP Vandal Resistant Station''', '''IPARIO'''  and '''IP Dual Display Station'''.<br>
'''IP Desktop Master Station''', '''IP Substation''', '''IP Vandal Resistant Station''', '''IPARIO'''  and '''IP Dual Display Station'''.<br>
The firmware is delivered in two different ZIP archives:
The firmware is delivered in two different ZIP archives:
* A100G80200.02_08_X_X - Used for standard INCA IP Intercom devices
* A100G80200.02_08_X_X - Used for standard INCA IP Intercom devices
* A100G802'''D'''0.02_08_X_X - Used for IP Dual Display Station
* A100G802'''D'''0.02_08_X_X - Used for IP Dual Display Station
'''Version:''' 02.08.2.1 <br>
'''Version:''' 02.08.3.3 <br>
'''Date:''' 20.03.2018 <br>
'''Date:''' 22.02.2019 <br>
'''Status:''' Limited Availability (LA) <br>
'''Status:''' General Availability (GA) <br>
'''Note:''' Release notes for the '''Video module''' component in [[IP Desktop Station with Video Display - 1408001635|IP Desktop Station with Video Display (1408001635)]] can be found in separate document on Vingtor-Stentofon AlphaWiki page [[IP Desktop with Video Display - Release Notes|IP Desktop with Video Display - Release Notes]]
'''Note:''' Release notes for the '''Video module''' component in [[IP Desktop Station with Video Display - 1408001635|IP Desktop Station with Video Display (1408001635)]] can be found in separate document on Zenitel Wiki page [[IP Desktop with Video Display - Release Notes|IP Desktop with Video Display - Release Notes]]
<br><br>


== New Features 2.8.2.1 (LA) ==
None


==Bugfixes and Improvements 2.8.2.1 (LA)==
== Version 2.8.3.3 ==
===SNOW-240 StationWeb - inconsistent location of Keyboard Settings page===
===Bugfixes and Improvements ===
Renamed the page to "Keyboard Settings" and moved it to SIP Configuration - for Pulse and SIP mode
====MTN-2289 Two gong signals applied instead of one for group calls in Pulse mode====
This has now been fixed.


===MTN-408 802.1X config not properly handling special characters in password===
===Known Issues ===
Characters like !#$%&/()=@* are now handled in the password input field for 802.1x.
==== MTN-1052 PTT does not work between Gateway and INCA station====
<br><br>
Make a call between Inca and Gateway. Pressing * and # on mobile phone configured on Gateway does not effect conversation direction on INCA.
If call is made between Turbine and Gateway, PTT works as expected.


==Security fixes and Improvements 2.8.2.1 (LA)==
==== MTN-883 IP Flush (Pulse) shows error 484 when dialing and pressing C====  
None
When start to dial a number and then hit C, error message 484 is shown on the display. The fault appears in Pulse server mode and Pulse client mode.


==Known Issues 2.7.3.0 (GA)==
==== MTN-817 IP Video Desktop does not indicate private/open mode====  
===MTN-268 Relay follow M-key cannot handle quick M===
There is no user feedback when changing between open/private mode with C-key, and no indication of what mode the station is currently in.
Relay configured to follow M-key does not handle quick press on M-key


===MTN-392 Using DAK as C key makes the IP DualDisplay unresponsive for up to 15 seconds===
==== MTN-482 Transfer function doesn't work with Cisco CCM====  
In the testing two DAK keys was configured in AlphaPro as "C" and "CTOFF".
When the station is used in SIP mode, connected to a Cisco Call manager (version: 9.1.1.21020-1) the permanent call transfer function does not work. When calling the station, we hear a Cisco Call manager message saying that this number is unreachable. In the Cisco station settings the transfer is not activated.
If DAK1 is pressed during idle the station does no respond to key-press or incoming call for about 3 seconds. Calling the station will result in a Camp On Busy. Pressing DAK2 causes the station to not respond for up to 15 seconds.


===MTN-394 INCA Station does not receive group call audio while speaking into a Simplex Conference===
==== MTN-598 IP station fails to register if Hebrew name is too long====  
INCA IP Station does not receive group call audio while speaking (M-key pressed) into a Simplex Conference, or if it is a Default Speaker of a SX conference.
More than 12 characters entered causes registration problems


===MTN-408 802.1X config not properly handling special characters in password===
==== MTN-268 Relay follow M-key cannot handle quick M====  
Character like % is not handled in the password input field for 802.1x.
Relay configured to follow M-key does not handle quick press on M-key


===MTN-482 Transfer function doesn't work with Cisco CCM===
When the station is used in SIP mode, connected to a Cisco Call manager (version: 9.1.1.21020-1) the permanent call transfer function does not work. When calling the station, we hear a Cisco Call manager message saying that this number is unreachable. In the Cisco station settings the transfer is not activated.


===MTN-598 INCA station fails to register if Hebrew name is too long===
== Version 2.8.3.2 ==
More than 12 characters entered causes registration problems
=== New Features===
==== MTN-1213 In-call automatic failover to redundant SIP server====
Improvements were done for parallel registration mode with backup SIP domains resulting in automatic and almost instant in-call failover to a backup SIP server. If the station is registered to multiple servers it will try the next server automatically if the call setup fails. If the station fails to register to all available SIP servers, it can be configured with registration retry "burst mode" interval so it gets connected immediately to a first available server.


===MTN-702 Handset volume cannot be adjusted in Desktop Video Station===
<br>
The handset volume is not adjusted when using the volume keys on the station, even though it correctly shows the volume bar going up/down in the display. Adjusting handset volume from the StationWeb is OK


===MTN-817 IP Video Desktop does not indicate private/open mode===
== Version 2.8.3.1 ==
There is no user feedback when changing between open/private mode with C-key, and no indication of what mode the station is currently in.
===Bugfixes and Improvements ===
==== MTN-2044 Wrong volume applied on boot in SIP/Pulse mode on INCA ====
The volume would always be set to 0 no matter what the last configured volume was. This is now fixed, and the configured volume will be kept.


===MTN-883 IP Flush (Pulse) shows error 484 when dialing and pressing C===
When start to dial a number and then hit C, error message 484 is shown on the display. The fault appears in Pulse server mode and Pulse client mode.


===MTN-948 Hebrew not displayed correctly in Video Desk display===
When an AlphaCom system is set to Hebrew language the display in the Video Desk station is not showing Hebrew characters. If station name is written in Latin letters, only 5 or 6 characters are shown. Display is in correct reverse though (right to left).


===MTN-970 LCD screen on IP Video Desktop will dim regardless of settings===
== Version 2.8.3.0 ==
The LCD screen on the IP Video Desktop appears to dim, even though the two settings "Time until Activation" and "Time Until Shutdown" under Screensaver category is set to off and never.
=== New Features===
==== SNOW-191 Support SIP Early Media during 180-Ringing or 183-Session Progress ====
Support playing a media during SIP 180-Ringing or SIP 183 Call progress, instead of a locally generated ringing tone. This is a very common setup in iPBX systems where server shall generate a media to be played during session progress and before call is accepted (e.g. Call queued before answered). Note that we do not fully support RFC3960.  


===MTN-1052 PTT does not work between Gateway and INCA station===
==== SNOW-278 IP Multicast audio support for SIP Intercom ====
Make a call between Inca and Gateway. Pressing * and # on mobile phone configured on Gateway does not effect conversation direction on INCA.
Turbine and INCA IP intercom stations now support IP multicast audio when configured in SIP mode. Up to 10 multicast IP addresses can be configured.
If call is made between Turbine and Gateway, PTT works as expected.


===MTN-1290 INCA Off-hook tone if digit pressed during tone test===
===Bugfixes and Improvements ===
If any digit is pressed or conversation open, it will be mixed with the off-hook tone.
====SNOW-240 StationWeb - inconsistent location of Keyboard Settings page====
Renamed the page to "Keyboard Settings" and moved it to SIP Configuration - for Pulse and SIP mode




[[Category: Release notes]]
[[Category: Release notes]]

Latest revision as of 15:00, 14 October 2025

Release info

Name: VSF-INCA
Description: VSF-INCA is a firmware archive for all INCA based Intercom stations including devices: IP Desktop Master Station, IP Substation, IP Vandal Resistant Station, IPARIO and IP Dual Display Station.
The firmware is delivered in two different ZIP archives:

  • A100G80200.02_08_X_X - Used for standard INCA IP Intercom devices
  • A100G802D0.02_08_X_X - Used for IP Dual Display Station

Version: 02.08.3.3
Date: 22.02.2019
Status: General Availability (GA)
Note: Release notes for the Video module component in IP Desktop Station with Video Display (1408001635) can be found in separate document on Zenitel Wiki page IP Desktop with Video Display - Release Notes


Version 2.8.3.3

Bugfixes and Improvements

MTN-2289 Two gong signals applied instead of one for group calls in Pulse mode

This has now been fixed.

Known Issues

MTN-1052 PTT does not work between Gateway and INCA station

Make a call between Inca and Gateway. Pressing * and # on mobile phone configured on Gateway does not effect conversation direction on INCA. If call is made between Turbine and Gateway, PTT works as expected.

MTN-883 IP Flush (Pulse) shows error 484 when dialing and pressing C

When start to dial a number and then hit C, error message 484 is shown on the display. The fault appears in Pulse server mode and Pulse client mode.

MTN-817 IP Video Desktop does not indicate private/open mode

There is no user feedback when changing between open/private mode with C-key, and no indication of what mode the station is currently in.

MTN-482 Transfer function doesn't work with Cisco CCM

When the station is used in SIP mode, connected to a Cisco Call manager (version: 9.1.1.21020-1) the permanent call transfer function does not work. When calling the station, we hear a Cisco Call manager message saying that this number is unreachable. In the Cisco station settings the transfer is not activated.

MTN-598 IP station fails to register if Hebrew name is too long

More than 12 characters entered causes registration problems

MTN-268 Relay follow M-key cannot handle quick M

Relay configured to follow M-key does not handle quick press on M-key


Version 2.8.3.2

New Features

MTN-1213 In-call automatic failover to redundant SIP server

Improvements were done for parallel registration mode with backup SIP domains resulting in automatic and almost instant in-call failover to a backup SIP server. If the station is registered to multiple servers it will try the next server automatically if the call setup fails. If the station fails to register to all available SIP servers, it can be configured with registration retry "burst mode" interval so it gets connected immediately to a first available server.


Version 2.8.3.1

Bugfixes and Improvements

MTN-2044 Wrong volume applied on boot in SIP/Pulse mode on INCA

The volume would always be set to 0 no matter what the last configured volume was. This is now fixed, and the configured volume will be kept.


Version 2.8.3.0

New Features

SNOW-191 Support SIP Early Media during 180-Ringing or 183-Session Progress

Support playing a media during SIP 180-Ringing or SIP 183 Call progress, instead of a locally generated ringing tone. This is a very common setup in iPBX systems where server shall generate a media to be played during session progress and before call is accepted (e.g. Call queued before answered). Note that we do not fully support RFC3960.

SNOW-278 IP Multicast audio support for SIP Intercom

Turbine and INCA IP intercom stations now support IP multicast audio when configured in SIP mode. Up to 10 multicast IP addresses can be configured.

Bugfixes and Improvements

SNOW-240 StationWeb - inconsistent location of Keyboard Settings page

Renamed the page to "Keyboard Settings" and moved it to SIP Configuration - for Pulse and SIP mode

Retrieved from "https://wiki.zenitel.com/w/index.php?title=INCA_2.8_-_Release_Notes&oldid=240795"
MediaWiki spam blocked by CleanTalk.