Difference between revisions of "System Status (Event Type)"
From Zenitel Wiki
(→Additional information) |
(→Macro to read current state of system event) |
||
Line 33: | Line 33: | ||
==Macro to read current state of system event== | ==Macro to read current state of system event== | ||
− | %syse(sub_event) | + | [[%syse]](sub_event) |
Return 1 (TRUE) if sub event is ON. | Return 1 (TRUE) if sub event is ON. | ||
− | |||
==Application== | ==Application== |
Revision as of 09:41, 14 August 2012
Contents
Event description
Event Owner: | Station number 1 (fixed) |
Event type: | 27 - System Status |
Subevent: | Device ID |
When change to ON: | When a device is reported UP |
When change to OFF: | When a device is reported DOWN |
When related to: | N/A (Use "All") |
- Available from AMC 09.05 (Pocket Paging from AMC 10.52, IP-HA state and %syse from 11.2.3.4)
Additional information
- Sub-event 1 – 64: RIO, PC (AlphaVision)
- Sub-event 65 – 68: Exchange modules
- The ON event is reported when all cards are scanned (exchange is operational). If the exchange is standby in IP-HA this sub event will not be reported.
- Sub-event 210 – 217: Serial ports 0 – 7
- Only AlphaNet and MultiModule is reported
- Sub-event 218 – 221: Pocket Paging ports "Tateco", "Ericcson", "Multitone", "Fire input", ISO1745 link poll status.
High Availability (IP-HA):
- Sub-event 230: ON = Local Exchange in standby mode. OFF = Operational mode.
- Sub-event 231: ON = HA connection OK with related Standby/Operational exchange. OFF = No connection with remote node.
- After reset both events will be reported after sub-event 65. (In standby sub-event 65 will not be reported, but 230 and 231 will)
Macro to read current state of system event
%syse(sub_event)
Return 1 (TRUE) if sub event is ON.
Application
- System and AlphaNet surveillance and reporting
- Trigger actions after system boot
- 3rd party information of HA state