Difference between revisions of "Door opening"
From Zenitel Wiki
Line 3: | Line 3: | ||
Related Articles: | Related Articles: | ||
− | * [[1-4h._Door_Opening,_Code_Lock_(practice)|Door Opening - Configuration example]] | + | * [[1-4h._Door_Opening,_Code_Lock_(practice)|Door Opening and Code Lock - practice with solution]] |
+ | * [[Door Opening - Configuration example]] | ||
* [[Door Opening - During Conversation (Event Type)]] | * [[Door Opening - During Conversation (Event Type)]] | ||
* [[Door Opening - Automatick Lock (Event Type)]] | * [[Door Opening - Automatick Lock (Event Type)]] |
Revision as of 10:04, 22 May 2015
Door opening is a feature triggered by pressing digit 6 during conversation with the door station. When pressing the digit, a RCO is triggered for 3,5 seconds (programmable from AlphaPro, Exchange & System -> Systems -> Timers -> RCO Pulse (Door Open) Time). The RCO output operates a relay on a MRBD relay board or the relay of the IP substation, to which the door magnet is connected.
Related Articles:
- Door Opening and Code Lock - practice with solution
- Door Opening - Configuration example
- Door Opening - During Conversation (Event Type)
- Door Opening - Automatick Lock (Event Type)
- Door Opening through AudioCodes
- Door Opening through SIP Trunk
- Map RCO to IP Station
- Turbine I/O Settings
- Door Opening using Dummy Number (Event Handler)
- Door opening of Ring Master stations from AlphaCom
- AlphaCom/M100 Integration - Door Opening