|
|
(28 intermediate revisions by 2 users not shown) |
Line 1: |
Line 1: |
− | This article describes how a master station can be locked in idle, and unlocked by dialing a passcode (Event Trigger). When the code is dialed, the station will be unlocked for a preset periode of time, then it will automatically be locked. | + | {{AI}} |
| + | This article describes how a master station can be locked in idle, and unlocked by dialing a passcode. When the code is dialed, the station will be unlocked for a preset periode of time, then it will automatically be locked again. |
| | | |
− | In the programming example below the master station dials 9535 + substation directory number to disable calls from that substation for 15 minutes. The feature code 9535 and the substation numbers can be assigned to DAK keys for easy operation.
| + | The passcode is an [[Event Trigger (Event Type)|Event Trigger]] number. When dialed it will move the station to a [[Class of service|COS (Class of Service)]] in which all wanted features are enabled. Also a timer is started. When the timer expires, the station will be moved to a COS were all features are disabled, except the event trigger feature itself. |
| | | |
− | If the master station is a [[Control Room Master IV|CRM IV]] or [[IP Flush Master - 1008031000|CRM V]] station with [[DAK48 module - 1008010100|DAK48 panel]], the "disabled" status will be indicated with a red LED in the assosiated button on the DAK panel.
| + | * In AlphaPro - Directory & Features, '''Insert''' a new event trigger directory number with feature number 85, e.g. 9200. |
| + | [[File:UnlockDirNo.PNG|thumb|left|500px|Create a passcode using feature 85. Here 9200 is used as passcode]] |
| + | <br style="clear:both;" /> |
| + | * In AlphaPro - COS, modify COS 2 to include feature 85 only. |
| + | [[File:UnlockCOS2.PNG|thumb|left|500px|Make feature 85 (event trigger) available in COS 2]] |
| + | <br style="clear:both;" /> |
| | | |
− | If the master station is a DualDisplay station (either [[Dual Display Station - 1007007000|analog]] or [[IP Dual Display Station - 1008007000|IP based]]), the "disabled" status will be highlighted with inverse video in the assosiated button in the DAK display.
| |
| | | |
| + | * Program two new events in the Event Handler. |
| | | |
− | ==Solution==
| + | In AlphaPro, select '''Exchange & System''' - > '''Events''', and '''Insert''' two events with the following properties: |
− | Directory number 9535 is by default a two-step event trigger, [[Event_Trigger_w/User_Parameter|feature 95/0]]. When 9535 + Substation is dialled, an [[Event_Trigger_with_parameter_%28Event_Type%29|event type 25]] is triggered and the action string [[SET_STATION_COS|$SSC L%2.dir U2]] moves the substation to [[COS]] 2. COS 2 is by default empty, which will prevent calls to be initiated. The command [[DISCON_ST|$DISCON_ST L%1.dir U2]] will disconnect the master station with a success tone after having entered the substation number. The [[PROGRAM|$PROG L%2.dir LV]] command will switch off audio program on the substation. The [[IND|IND %1.phy %1.dak(I%2.dir) 1 1 ON]] command will turn on the red LED in the DAK48 panel if a CRMIV or CRMV station is used. A 15 minute timer is started by the command [[SET_TIMER|$ST L%2.dir W9000 L9988]].
| |
| | | |
− | When the timer expires it will trigger [[Event_Timeout_%28Event_Type%29|event type 21]], and the command [[SET_STATION_COS|$SSC L%1.dir U1]] will move the station back to COS 1, the [[IND|IND %1.phy %1.dak(I%2.dir) 1 1 OFF]] command will switch off the red LED, and calls and program selection can again be made.
| + | '''Event 1''' - Unlock the station by moving the station to COS 1 when dialing passcode 9200. A 10,0 second timer is started. |
| + | [[File:Application24a.png|500px|left|thumb|]] |
| + | <br style="clear:both;" /> |
| | | |
− | ------------
| + | {{Code2| |
− | '''Event 1''' - Move the substation to COS 2, start a timer, and disconnect the master station.
| + | [[SET_STATION_COS|$SSC L%1.dir U1]] |
− | {| | + | [[SET_TIMER|$ST L%1.dir W100 L9200]] |
− | |-
| + | }} |
− | |width="100pt"|'''Event Owner''':
| |
− | |width="400pt"|The Master Station
| |
− | |-
| |
− | |'''Event type''': || [[Event Trigger with parameter (Event Type)|25 – Event trigger with parameter]]
| |
− | |-
| |
− | |'''Subevent''': || 0
| |
− | |-
| |
− | |'''When change to''': || ON
| |
− | |-
| |
− | |'''When related to''': || All
| |
− | |-
| |
− | |'''Action''': || [[SET_STATION_COS|$SSC L%2.dir U2]]
| |
− | |-
| |
− | | || [[DISCON_ST|$DISCON_ST L%1.dir U2]]
| |
− | |-
| |
− | | || [[PROGRAM|$PROG L%2.dir LV]]
| |
− | |-
| |
− | | || [[IND|IND %1.phy %1.dak(I%2.dir) 1 1 ON]]
| |
− | |-
| |
− | | || [[SET_TIMER|$ST L%2.dir W9000 L9988]]
| |
− | |}
| |
| | | |
− | ---------------
| + | The parameter W100 = 10.0 seconds. Change if required. |
− | '''Event 1''' - Unlock the station by moving the station to COS 1 when dialing passcode 9980.
| |
− | {|
| |
− | |-
| |
− | |width="100pt"|'''Event Owner''':
| |
− | |width="400pt"|Stations w/UDP, Id: 8 (All stations)
| |
− | |-
| |
− | |'''Event type''': || 15 – Event trigger
| |
− | |-
| |
− | |'''When change to''': || ON
| |
− | |-
| |
− | |'''When related to''': || Directory number, Id: 9980
| |
− | |-
| |
− | |'''Action''': || [[SET_STATION_COS|$SSC L%1.dir U1]]
| |
− | |-
| |
− | | || [[SET_TIMER|$ST L%2.dir W100 L9980]]
| |
− | |-
| |
− | |}
| |
| | | |
| | | |
− | ---------------
| |
− | '''Event 1''' - Lock the station by moving it to COS 2 after timeout.
| |
− | {|
| |
− | |-
| |
− | |width="100pt"|'''Event Owner''':
| |
− | |width="400pt"|Stations w/UDP, Id: 8 (All stations)
| |
− | |-
| |
− | |'''Event type''': || [[Event Timeout (Event Type)|21 – Event timer]]
| |
− | |-
| |
− | |'''When change to''': || ON
| |
− | |-
| |
− | |'''When related to''': || Directory number, Id: 9980
| |
− | |-
| |
− | |'''Action''': || [[SET_STATION_COS|$SSC L%1.dir U2]]
| |
− | |-
| |
− | |}
| |
| | | |
− | == Additional notes==
| + | '''Event 2''' - After the 10 sec timeout, lock the station by moving it to COS 2. |
− | If there are several two-step event triggers used for different features, they must be separated by using different parameter 1 for the feature 95, i.e. 95/0, 95/1, 95/2 etc.
| + | [[File:Application24b.png|500px|left|thumb|]] |
| + | <br style="clear:both;" /> |
| | | |
− | Example:
| + | {{Code2| |
− | * 9535 = 95/0 (default)
| + | [[SET_STATION_COS|$SSC L%1.dir U2]] |
− | * 9546 = 95/1
| + | }} |
− | * 9547 = 95/2
| |
| | | |
− | ------------------
| + | {{Note| By default all stations are in COS 1, and thereby "Unlocked". To prevent that a SendAll from AlphaPro will "unlock" all stations, it is recommended to "lock" all stations by moving them to COS 2 in the AlphaPro database.}} |
| + | [[File:UnlockCOS2_2.PNG|thumb|left|500px|Put stations in COS 2]] |
| + | <br style="clear:both;" /> |
| | | |
| | | |
− | [[Category:Applications]] | + | [[Category:AlphaCom Applications]] |
| + | [[Category:ICX-AlphaCom Applications]] |
This article describes how a master station can be locked in idle, and unlocked by dialing a passcode. When the code is dialed, the station will be unlocked for a preset periode of time, then it will automatically be locked again.
The passcode is an Event Trigger number. When dialed it will move the station to a COS (Class of Service) in which all wanted features are enabled. Also a timer is started. When the timer expires, the station will be moved to a COS were all features are disabled, except the event trigger feature itself.
- In AlphaPro - Directory & Features, Insert a new event trigger directory number with feature number 85, e.g. 9200.
Create a passcode using feature 85. Here 9200 is used as passcode
- In AlphaPro - COS, modify COS 2 to include feature 85 only.
Make feature 85 (event trigger) available in COS 2
- Program two new events in the Event Handler.
In AlphaPro, select Exchange & System - > Events, and Insert two events with the following properties:
Event 1 - Unlock the station by moving the station to COS 1 when dialing passcode 9200. A 10,0 second timer is started.
Action commands:
The parameter W100 = 10.0 seconds. Change if required.
Event 2 - After the 10 sec timeout, lock the station by moving it to COS 2.
Action commands:
|
By default all stations are in COS 1, and thereby "Unlocked". To prevent that a SendAll from AlphaPro will "unlock" all stations, it is recommended to "lock" all stations by moving them to COS 2 in the AlphaPro database.
|