Actions

Difference between revisions of "Yealink VP530"

From Zenitel Wiki
 
(15 intermediate revisions by 2 users not shown)
Line 1: Line 1:
−
[[File:Snom XE Video.PNG|thumb|right|500px|Snom IP Phone with AlphaCom XE server]]
+
{{EP}}
 +
[[File:YeaLink Edge Pulse.png|thumb|right|500px|Yealink VP530 IP Phone in IC-EDGE/Pulse System]]
 +
This article describes how to set up the IP Video Phone '''Yealink VP530''' to operate in an '''IC-EDGE''' or '''PULSE System'''. The Yealink phone can be used for just audio, or it can also be used to show the video image from a Turbine Video Station TCIV.
  
−
This article describes how to set up the IP phone '''Yealink VP530''' to operate with an AlphaCom server. The Yealink phone can be used for audio only, or they can also be used to show the video image from a Stentofon IP Video Door Station.
+
Video from the following stations are supported:
 +
* Turbine Compact Video Stations [[TCIV-2]], [[TCIV-3]], [[TCIV-5]] and [[TCIV-6]]
  
−
For video the following possibilities can be realized:
+
Note that video from these stations is ''not supported'':
−
* '''Pop up video image'''. The video image of IP Video Door Station is shown automatically on an incoming call and end automatically when the communication is finished.
+
* [[IP Video Door Station - 1401110100]]
−
* '''Manual video image'''. The video image of the IP Video Door Station can be activated and ended by pressing a function key.
+
* [[IP Video Door Station - 1401110200]]
  
 +
== License configuration ==
 +
A SIP phone license is required on the [[Edge Controller]]/[[Pulse Server]], and a SIP User account must be defined in the Edge Controller/Pulse Server in order for the SIP phone to register.
  
−
== AlphaCom configuration ==
+
* Pulse: [[Pulse Licensing|SIP phone license]] & [[Pulse_System_Configuration#3rd-party_SIP_phones|SIP User account]]
−
The Snom phone must be configured as a SIP User in AlphaPro, '''Users & Stations'''. See article [[SIP phone as station]] for details.
+
* Edge: [[Licensing in IC-EDGE|SIP Client Extension]] & [[Configure_3rd_party_SIP_devices_(Edge)#Create_a_SIP_Account|Create a SIP Account]]
−
 
 
  
 
== Configuration of the Yealink phone via the web user interface ==
 
== Configuration of the Yealink phone via the web user interface ==
−
 
+
The phone can be configured via the web user interface or via the phone user interface. This article describes configuration via the web user interface.
−
The phone can also be configured via the phone user interface, please refer to the ''Quick Installation Guide'' for the phone.
 
  
 
===Network settings  ===
 
===Network settings  ===
Line 21: Line 24:
 
# Enter the user name (default: '''admin''') and password (default: '''admin''') in the pop-up dialogue box and click '''OK'''
 
# Enter the user name (default: '''admin''') and password (default: '''admin''') in the pop-up dialogue box and click '''OK'''
 
# Click on '''Network'''. Configure the phone to use '''DHCP''' (obtain an IP address automatically) or '''Static IP address'''.
 
# Click on '''Network'''. Configure the phone to use '''DHCP''' (obtain an IP address automatically) or '''Static IP address'''.
−
 
+
[[File:Yealink Network.PNG|thumb|500px|left|Network settings in Yealink VP530]]
 +
<br style="clear:both;" />
 
=== SIP account ===
 
=== SIP account ===
  
 
# Click on '''Account'''
 
# Click on '''Account'''
 
# '''Account''': Select "Account 1"
 
# '''Account''': Select "Account 1"
−
# '''Register Status''': Shows if the phone is registered to the AlphaCom on this account  
+
# '''Register Status''': Shows if the phone is registered to the Pulse server on this account  
 
# '''Account active''': Enable
 
# '''Account active''': Enable
 
# '''Label''': Is shown in the LCD screen to identify the account
 
# '''Label''': Is shown in the LCD screen to identify the account
−
# '''Display Name''': Is shown as Caller ID when placing a call (When used with AlphaCom, the AlphaCom will provide the Caller ID)
+
# '''Display Name''': Is shown as Caller ID when placing a call
−
# '''Register Name''': Authentication ID. Must match with the[[ directory number]] entered in the AlphaCom
+
# '''Register Name''': Authentication ID. Must match with the directory number entered in the Pulse server
−
# '''User Name''': Must match with the[[ directory number]] entered in the AlphaCom
+
# '''User Name''': Must match with the directory number entered in the Pulse server
−
# '''SIP Server''': The AlphaCom IP address
+
# '''SIP Server''': The Pulse server IP address
 
[[File:Yealink Account.PNG|thumb|500px|left|Setting up a SIP account in Yealink VP530]]
 
[[File:Yealink Account.PNG|thumb|500px|left|Setting up a SIP account in Yealink VP530]]
 
<br style="clear:both;" />
 
<br style="clear:both;" />
  
 
=== Door Opening feature (optional) ===
 
=== Door Opening feature (optional) ===
−
During conversation with the Door Station a relay can be operated by pressing digit 6 on the Snom phone. The phone uses DTMF by RFC2833 by default, which is supported by AlphaCom, so no settings are required in the phone.
+
During conversation with the Turbine Video Station TCIV the integrated relay of the station can be [[Door opening|operated by pressing a digit]] (default: digit 6) on the phone. As the phone by default is using DTMF signaling by RFC 2833, and this is supported by the Turbine range of stations, no further settings are required in the phone.
  
−
In AlphaCom the relay must be mapped to a logical RCO, and an "Door Opening" event created to trigger this RCO.
+
If the phone should operate the relay in other types of IP Substations (non-Turbine), the phone must be set to signal DTMF by SIP INFO.
  
−
To map a logical RCO to the relay of the IP Station, select '''Exchange & System''' -> '''RCO'''. Pick a free RCO, select Change and set the RCO Type = Station, enter the physical number of the IP Station, and set pin number = 1. In the example below the relay of IP Video Door station 48 (directory number 148) is mapped to RCO 11.
+
* Click on '''Account''' > '''Advanced''', and set '''DTMF Type''' to "SIP INFO":
−
<br/>
 
−
[[File:SnomVideo10.png|thumb|500px|left|Logical RCO 11 is mapped to the relay of station 48]]
 
−
<br style="clear:both;" />
 
  
−
 
+
[[File:Yealink SIP INFO.PNG|thumb|500px|left|Setting DTMF Type to SIP INFO]]
−
Create a "Door Opening" event with the IP Video Door Station as the event owner. Select '''Exchange & System''' -> '''Events''', and '''Insert''' a new event with the following properties:
 
−
 
 
−
[[File:SnomVideo9.png|thumb|500px|left|During conversation with the door station (148), pressing digit 6 will trigger the relay (RCO 11)]]
 
 
<br style="clear:both;" />
 
<br style="clear:both;" />
  
−
*Connection details, IP Substation: [[IP Station Board Connections and Indications]]
+
=== Configuration for Video ===
−
*Connection details, Turbine: [[TCIS_Connections|Turbine connections]]
+
To enable reception of video from the Turbine Video Station TCIV, go to '''Account''' settings, and set '''Preferred Call Type''' = "Video Call". This will enable video image in the phone when a call is placed between the TCIV and the Yealink phone.
  
−
== Configuration for Video ==
+
[[File:Yealink VideoCall.PNG|thumb|500px|left|Set '''Preferred Call Type''' = "Video Call". ]]
−
The Snom phones can be configured to show video image from the following stations/cameras:
 
−
* [[IP Video Door Station - 1401110100]]
 
−
* [[IP Video Door Station - 1401110200]]
 
−
* [[Turbine Compact IP Video-3 - 1008115030|Turbine Compact IP Video - TCIV]]
 
−
* External Axis camera
 
−
 
 
−
 
 
−
 
 
−
* '''Note 1''': The cameras must have a Static IP address.
 
−
* '''Note 2:''' In order to support video, the Snom phone must have the correct firmware. See [[#Firmware update of Snom phone|Firmware update of Snom phone]] at the bottom of this article.
 
−
* '''Note 3:''' When using Axis camera, an [[#Axis camera - Uploading .XML file|.xml file must be uploaded to the camera]]. This is applicable for [[IP Video Door Station - 1401110200|IP Video Door Station model 1401110200]] as well as when using standalone Axis camera.
 
−
 
 
−
 
 
−
=== Pop up video image ===
 
−
The screen of the Snom IP phone can be used to automatically show the video image during a call. The [[directory number]] of the station must be defined in the Directory of the Snom phone. When a call is made or received, the telephone will look up in the Directory, and find the correct URL for the associated camera.
 
−
 
 
−
In the web interface of the phone, select '''Directory''' in the menu, and enter the following parameters:
 
−
* '''Number''': The directory number of the IP Video Door Station, as entered in AlphaPro, Users & Stations.
 
−
* '''Title''': Enter any text
 
−
* '''Action URL''': Which URL to use depends on the type of camera/IP Station being used:
 
−
** '''IP Video Door Station - 1401110100''' (CP-CAM camera): <nowiki>http://<IP address of the camera>/snoma.cgi.</nowiki> For example '''http://10.5.101.95/snoma.cgi'''
 
−
** '''IP Video Door Station - 1401110200''' (Axis camera): <nowiki>http://<IP address of the camera>/local/viewer/snomaxis.xml.</nowiki> For example '''http://10.5.101.87/local/viewer/snomaxis.xml'''
 
−
** '''Turbine Compact IP Video - TCIV''': <nowiki>http://<IP address of the camera>/snoma.cgi.</nowiki> For example '''http://10.5.101.38/snoma.cgi'''
 
−
** '''External Axis camera''': <nowiki>http://<IP address of the camera>//local/viewer/snomaxis.xml.</nowiki> For example '''http://10.5.101.37/local/viewer/snomaxis.xml'''
 
−
* '''Nickname''': Enter any text
 
−
 
 
−
 
 
−
[[File:SnomVideo4.png|thumb|500px|left|Configure the IP Video Door station in the Directory list of the Snom phone]]
 
 
<br style="clear:both;" />
 
<br style="clear:both;" />
  
−
===Manual video image ===
+
== Turbine Station TCIV - Video Settings ==
−
The video image can be started and ended manually by pressing a function key. With this feature the video image can be displayed without setting up a conversation.
+
'''Edge''':
 +
* In IC-EDGE System there is no need to do any configuration from the default settings in the TCIV.
  
−
In the web interface of the phone, select '''Function Keys''' in the menu, and enter the following parameters:
+
'''Pulse''':
−
* '''Context''': Active
+
* Log on to the TCIV station (default username: '''admin''', password: '''alphaadmin''')
−
* '''Type''': Action URL
+
* Select '''SIP Configuration''' > '''Video Settings''', and set:
−
* '''Number''': The URL for the camera. Which URL to use depends on the camera being used:
+
** '''Video mode''': H.264
−
** '''IP Video Door Station - 1401110100''' (CP-CAM camera): <nowiki>http://<IP address of the camera>/snoma.cgi.</nowiki> For example '''http://10.5.101.95/snoma.cgi'''
 
−
** '''IP Video Door Station - 1401110200''' (Axis camera): <nowiki>http://<IP address of the camera>/local/viewer/snomaxis.xml.</nowiki> For example '''http://10.5.101.87/local/viewer/snomaxis.xml'''
 
−
** '''Turbine Compact IP Video - TCIV''': <nowiki>http://<IP address of the camera>/snoma.cgi.</nowiki> For example '''http://10.5.101.38/snoma.cgi'''
 
−
** '''External Axis camera''': <nowiki>http://<IP address of the camera>//local/viewer/snomaxis.xml.</nowiki> For example '''http://10.5.101.37/local/viewer/snomaxis.xml'''
 
−
* '''Short text''': Enter any text
 
  
−
 
+
[[File:Yealink TCIV.png|thumb|500px|left|In the TCIV station, set '''Video mode''' to H.264]]
−
[[File:SnomVideo1.png|thumb|500px|left|Pressing function key 1 will start the video image from camera 10.5.101.97]]
 
−
<br style="clear:both;" />
 
−
 
 
−
 
 
−
* '''Start video image''' by pressing the programmed key.
 
−
* '''End video image''' by pressing the "X-key".
 
−
 
 
−
=== Authentication ===
 
−
 
 
−
If the access of the CP-CAM camera is to be password protected, the following adjustments are necessary to the URL:
 
−
* <nowiki>http://<User name>:<Password>@<IP adress of the camera>/snoma.cgi. If for example username is "admin" and the password is "1234", enter http://admin:1234@10.5.101.97/snoma.cgi</nowiki>
 
−
 
 
−
== Axis camera - Uploading .XML file ==
 
−
 
 
−
When the Snom Phone is used to show an image from an Axis camera, an .xml file must be uploaded to the camera. This is applicable for IP Video Door Station model 1401110200 as well as when using standalone Axis camera.
 
−
 
 
−
* Create a new textfile on your windows desktop and rename it to '''snomaxis.xml'''.
 
−
* Open the file with a text editor e.g. Notepad
 
−
* Copy the following lines to the snomaxis.xml text file:
 
−
 
 
−
<nowiki><?xml version="1.0" encoding="UTF-8"?>
 
−
<SnomIPPhoneImageFile state="relevant" track="no" dtmf="on" >
 
−
<LocationX>00</LocationX>
 
−
<LocationY>00</LocationY>
 
−
<url>http://<ip-address>/axis-cgi/jpg/image.cgi?resolution=320x240</url>
 
−
<fetch mil="100">http://<ip-address>/local/viewer/snomaxis.xml</fetch>
 
−
</SnomIPPhoneImageFile></nowiki>
 
−
 
 
−
* Replace the two ''<ip-address>'' tags with the IP address of your camera.
 
−
* Save the file.
 
−
* Etablish a FTP connection to the IP camera, using e.g. the PC tool [http://winscp.net/eng/index.php WinSCP]. Use the same username and password as the login on the webinterface.
 
−
* Navigate to the following folder: ''/mnt/flash/etc/httpd/html/viewer''
 
−
* Copy the snomaxis.xml into the folder.
 
−
* Close the FTP connection.
 
−
 
 
−
[[File:WinSCP Snomaxis.PNG|thumb|500px|left|Uploading the "snomaxis.xml" file to an Axis camera using the PC tool WinSCP]]
 
 
<br style="clear:both;" />
 
<br style="clear:both;" />
  
−
== Firmware update of Snom phone==
+
[[Category: Edge - SIP Video Phones]]
−
In order to support video, the Snom phone must have the correct firmware. The firmware is uploaded using a TFTP server.
+
[[Category: Pulse - SIP Video Phones]]
−
 
+
[[Category:Video]]
−
Upgrade procedure:
 
−
* Download firmware for the relevant Snom model from the [[Downloads#IP_Video_stations|AlphaWiki download site]]
 
−
* Unzip the file. Remember in which folder you stored the file
 
−
* Start a TFTP server, and browse to the folder which contains the file. A TFTP server can be downloaded here: [http://tftpd32.jounin.net/tftpd32_download.html TFTP server]
 
−
* In the Snom webinterface, select '''Software Update''' and enter address ''tftp://[TFTPServer]/[file name],'' where ''[TFTPServer]'' = IP address of PC running the TFTP server and ''[file name]'' is the name of the downloaded .bin file.
 
−
**Example: '''tftp://10.5.101.129/snom821-8.7.4.8-SIP-r.bin'''.
 
−
* Select '''Load''', and watch the progress on the display of the Snom phone
 
−
[[File:SnomVideo11.png|thumb|500px|left|Starting the software upgrade process]]
 
−
<br style="clear:both;" />
 
−
 
 
−
 
 
−
'''Note:''' It is not recommended to use newer beta versions like 8.7.5.10, 8.7.5.12 or 8.7.5.13 as they have known issues with the video handling.
 
−
 
 
−
 
 
−
[[Category: Video]]
 
−
[[Category: SIP]]
 

Latest revision as of 09:13, 17 September 2019

EP.png
Yealink VP530 IP Phone in IC-EDGE/Pulse System

This article describes how to set up the IP Video Phone Yealink VP530 to operate in an IC-EDGE or PULSE System. The Yealink phone can be used for just audio, or it can also be used to show the video image from a Turbine Video Station TCIV.

Video from the following stations are supported:

Note that video from these stations is not supported:

License configuration

A SIP phone license is required on the Edge Controller/Pulse Server, and a SIP User account must be defined in the Edge Controller/Pulse Server in order for the SIP phone to register.

Configuration of the Yealink phone via the web user interface

The phone can be configured via the web user interface or via the phone user interface. This article describes configuration via the web user interface.

Network settings

  1. Press the OK key when the phone is idle to get the IP address of the phone
  2. Open the web browser of your computer, enter the IP address into the addres bar (e.g. "http://192.168.0.10" or "192.168.0.10") and click Enter.
  3. Enter the user name (default: admin) and password (default: admin) in the pop-up dialogue box and click OK
  4. Click on Network. Configure the phone to use DHCP (obtain an IP address automatically) or Static IP address.
Network settings in Yealink VP530


SIP account

  1. Click on Account
  2. Account: Select "Account 1"
  3. Register Status: Shows if the phone is registered to the Pulse server on this account
  4. Account active: Enable
  5. Label: Is shown in the LCD screen to identify the account
  6. Display Name: Is shown as Caller ID when placing a call
  7. Register Name: Authentication ID. Must match with the directory number entered in the Pulse server
  8. User Name: Must match with the directory number entered in the Pulse server
  9. SIP Server: The Pulse server IP address
Setting up a SIP account in Yealink VP530


Door Opening feature (optional)

During conversation with the Turbine Video Station TCIV the integrated relay of the station can be operated by pressing a digit (default: digit 6) on the phone. As the phone by default is using DTMF signaling by RFC 2833, and this is supported by the Turbine range of stations, no further settings are required in the phone.

If the phone should operate the relay in other types of IP Substations (non-Turbine), the phone must be set to signal DTMF by SIP INFO.

  • Click on Account > Advanced, and set DTMF Type to "SIP INFO":
Setting DTMF Type to SIP INFO


Configuration for Video

To enable reception of video from the Turbine Video Station TCIV, go to Account settings, and set Preferred Call Type = "Video Call". This will enable video image in the phone when a call is placed between the TCIV and the Yealink phone.

Set Preferred Call Type = "Video Call".


Turbine Station TCIV - Video Settings

Edge:

  • In IC-EDGE System there is no need to do any configuration from the default settings in the TCIV.

Pulse:

  • Log on to the TCIV station (default username: admin, password: alphaadmin)
  • Select SIP Configuration > Video Settings, and set:
    • Video mode: H.264
In the TCIV station, set Video mode to H.264


Retrieved from "https://wiki.zenitel.com/w/index.php?title=Yealink_VP530&oldid=210767"