Actions

Difference between revisions of "INCA 2.8 - Release Notes"

From Zenitel Wiki
 
(37 intermediate revisions by one other user not shown)
Line 1: Line 1:
−
=VSF-INCA 2.8=
 
 
== Release info ==
 
== Release info ==
 
'''Name:''' VSF-INCA <br>
 
'''Name:''' VSF-INCA <br>
−
'''Description:''' VSF-INCA is a firmware archive for all [[:Category:INCA Stations|INCA based Intercom stations]] including devices:
+
'''Description:''' VSF-INCA is a firmware archive for all [[:Category:Stations#INCA_stations|INCA based Intercom stations]] including devices:
 
'''IP Desktop Master Station''', '''IP Substation''', '''IP Vandal Resistant Station''', '''IPARIO'''  and '''IP Dual Display Station'''.<br>
 
'''IP Desktop Master Station''', '''IP Substation''', '''IP Vandal Resistant Station''', '''IPARIO'''  and '''IP Dual Display Station'''.<br>
 
The firmware is delivered in two different ZIP archives:
 
The firmware is delivered in two different ZIP archives:
 
* A100G80200.02_08_X_X - Used for standard INCA IP Intercom devices
 
* A100G80200.02_08_X_X - Used for standard INCA IP Intercom devices
 
* A100G802'''D'''0.02_08_X_X - Used for IP Dual Display Station
 
* A100G802'''D'''0.02_08_X_X - Used for IP Dual Display Station
−
'''Version:''' 02.08.2.1 <br>
+
'''Version:''' 02.08.3.3 <br>
−
'''Date:''' 20.03.2018 <br>
+
'''Date:''' 22.02.2019 <br>
−
'''Status:''' Limited Availability (LA) <br>
+
'''Status:''' General Availability (GA) <br>
 
'''Note:''' Release notes for the '''Video module''' component in [[IP Desktop Station with Video Display - 1408001635|IP Desktop Station with Video Display (1408001635)]] can be found in separate document on Vingtor-Stentofon AlphaWiki page [[IP Desktop with Video Display - Release Notes|IP Desktop with Video Display - Release Notes]]
 
'''Note:''' Release notes for the '''Video module''' component in [[IP Desktop Station with Video Display - 1408001635|IP Desktop Station with Video Display (1408001635)]] can be found in separate document on Vingtor-Stentofon AlphaWiki page [[IP Desktop with Video Display - Release Notes|IP Desktop with Video Display - Release Notes]]
 +
<br><br>
  
−
== New Features ==
 
−
===VSIS-431 SNMP Informs support added===
 
−
IP stations now support using SNMP Informs for integration with network management systems.
 
  
−
===VSIS-693 Ringlist expanded to 30 entries with individual timeout option===
+
== Version 2.8.3.3 ==
−
It is now possible to use up to 30 ringlist entries and add a timeout using special option. Example configuration for ringing timer of 20 seconds: 100;ringing_timer=20
+
===Bugfixes and Improvements ===
 +
====MTN-2289 Two gong signals applied instead of one for group calls in Pulse mode====
 +
This has now been fixed.
  
−
===VSIS-698 Advanced network settings enabled in Pulse mode===
+
===Known Issues ===
−
Enabled Advanced network settings (802.1x, SNMP, Firewall) on the StationWeb and VS-IMT, for IP stations in Pulse mode.
+
==== MTN-1052 PTT does not work between Gateway and INCA station====
 +
Make a call between Inca and Gateway. Pressing * and # on mobile phone configured on Gateway does not effect conversation direction on INCA.
 +
If call is made between Turbine and Gateway, PTT works as expected.
  
−
===VSIS-757 Ringing tone volume increase and frequency (tone) customization===
+
==== MTN-883 IP Flush (Pulse) shows error 484 when dialing and pressing C====  
−
The volume of the tones have been increased for tone volume 1-4, in addition the frequency and some other parameters are now configurable.
+
When start to dial a number and then hit C, error message 484 is shown on the display. The fault appears in Pulse server mode and Pulse client mode.
  
−
===VSIS-1174 Mass configuration of 802.1x settings from VS-IMT===
+
==== MTN-817 IP Video Desktop does not indicate private/open mode====  
−
Added functionality in the VS-IMT to handle 802.1x network security settings for multiple stations at once. Both settings and security certificates (PKI) can be handled for many stations at once.  
+
There is no user feedback when changing between open/private mode with C-key, and no indication of what mode the station is currently in.
  
−
===VSIS-1175 Mass configuration of INCA VLAN settings from VS-IMT===
+
==== MTN-482 Transfer function doesn't work with Cisco CCM====  
−
Added functionality in the VS-IMT to handle VLAN network settings for multiple INCA stations at once.
+
When the station is used in SIP mode, connected to a Cisco Call manager (version: 9.1.1.21020-1) the permanent call transfer function does not work. When calling the station, we hear a Cisco Call manager message saying that this number is unreachable. In the Cisco station settings the transfer is not activated.
  
−
==Bugfixes and Improvements 2.7.3.1 (GA)==
+
==== MTN-598 IP station fails to register if Hebrew name is too long====  
−
===MTN-1290 INCA Off-hook tone if digit pressed during tone test===
+
More than 12 characters entered causes registration problems
−
If any digit is pressed or conversation open, it will be mixed with the off-hook tone.
 
−
 
 
−
===MTN-1496 Permanent Audio Stream (PAS) not working on INCA===
 
−
Fixed a bug in obsoleted license policing
 
  
−
==Bugfixes and Improvements 2.7.3.0 (GA)==
+
==== MTN-268 Relay follow M-key cannot handle quick M====  
−
===VSIS-1222 Internet Explorer had issues with properly handling dynamic UI controls===
 
−
Introduced better javascript handling so that all HTML components are properly rendered in IE
 
−
 
 
−
===VSIS-1146 Turbine and INCA fail in AlphaCom with Relay Multicast===
 
−
Multicast fails when Turbine and INCA listen to audio program over Relayed Subnet (AlphaCom environment)
 
−
 
 
−
==Bugfixes and Improvements 2.7.2.4 (LA)==
 
−
===MTN-113 Pulse Group call without M-key===
 
−
It is now possible to make a group call in Open mode, without need to press M-key to speak
 
−
 
 
−
===MTN-757 Inca station reboots on call transfer to an non-existing CUCM extension===
 
−
When attempting call transfer to an extension the CUCM can not find or is not allowed to transfer to, the Inca station reboots.
 
−
 
 
−
===MTN-852 Option to play ringing audio file once followed with normal tone===
 
−
It is now possible to play the wav file on once, then continue playing the normal tone signal
 
−
 
 
−
===MTN-947 The call LED was not flashing during ringing===
 
−
The call LED will now flash during ringing, unless this functionality has been disabled
 
−
 
 
−
===MTN-1048 Send text action does not display text on INCA display===
 
−
When using control input on Turbine in call to send text, text is not displayed on INCA display. It is shown in INCA log as received.
 
−
 
 
−
===MTN-1094 The webcall page was very slow to load in some versions after 2.5.3.2===
 
−
The webcall page should now load immediately
 
−
 
 
−
===MTN-1097 Disabling Tone Volume (-1 option) does not work===
 
−
Disable tone volume will now work.
 
−
 
 
−
===MTN-1105 The "Ringing Audio file" is mixed with the standard ringing tone===
 
−
This is fixed and only the WAV file is played
 
−
 
 
−
===MTN-1244 Adjustment of microphone volume in IP flush handset not possible===
 
−
It is now possible to adjust the handset microphone sensitivity separate from normal microphone
 
−
 
 
−
===VSIS-704 Group call should use caller codec===
 
−
Only the g722 codec was supported before, so now the call codec is taken from caller
 
−
 
 
−
===VSIS-1162 Disable Call functions on DAKs when Idle function does not support it===
 
−
Certain Idle functions do not allow Call function to be set on DAK. For those functions, Call functions are now disabled in station web.
 
−
 
 
−
==Security fixes and improvements 2.7.2.4 (LA)==
 
−
===VSIS-840 Security issue: SSL Certificate Weak Public Key Strength on Turbine/INCA===
 
−
Security scanner detected that SSL certificates are using weak public key strength. Key length has been increased to 2048.
 
−
 
 
−
===VSIS-841 Security issue: SSL Weak Protocol Version Supported on Turbine/INCA===
 
−
Security scanner detected support for old versions of SSL. These are now disabled.
 
−
 
 
−
===VSIS-842 Security issue: SSLv3 Fallback Vulnerability (POODLE) on Turbine/INCA===
 
−
Security scanner detected SSLv3 Fallback Vulnerability (POODLE). This is now fixed.
 
−
 
 
−
==Known Issues 2.7.3.0 (GA)==
 
−
===MTN-268 Relay follow M-key cannot handle quick M===
 
 
Relay configured to follow M-key does not handle quick press on M-key
 
Relay configured to follow M-key does not handle quick press on M-key
  
−
===MTN-392 Using DAK as C key makes the IP DualDisplay unresponsive for up to 15 seconds===
 
−
In the testing two DAK keys was configured in AlphaPro as "C" and "CTOFF".
 
−
If DAK1 is pressed during idle the station does no respond to key-press or incoming call for about 3 seconds. Calling the station will result in a Camp On Busy. Pressing DAK2 causes the station to not respond for up to 15 seconds.
 
  
−
===MTN-394 INCA Station does not receive group call audio while speaking into a Simplex Conference===
+
== Version 2.8.3.2 ==
−
INCA IP Station does not receive group call audio while speaking (M-key pressed) into a Simplex Conference, or if it is a Default Speaker of a SX conference.
+
=== New Features===
 +
==== MTN-1213 In-call automatic failover to redundant SIP server====
 +
Improvements were done for parallel registration mode with backup SIP domains resulting in automatic and almost instant in-call failover to a backup SIP server. If the station is registered to multiple servers it will try the next server automatically if the call setup fails. If the station fails to register to all available SIP servers, it can be configured with registration retry "burst mode" interval so it gets connected immediately to a first available server.
  
−
===MTN-408 802.1X config not properly handling special characters in password===
+
<br>
−
Character like % is not handled in the password input field for 802.1x.
 
  
−
===MTN-482 Transfer function doesn't work with Cisco CCM===
+
== Version 2.8.3.1 ==
−
When the station is used in SIP mode, connected to a Cisco Call manager (version: 9.1.1.21020-1) the permanent call transfer function does not work. When calling the station, we hear a Cisco Call manager message saying that this number is unreachable. In the Cisco station settings the transfer is not activated.
+
===Bugfixes and Improvements ===
 +
==== MTN-2044 Wrong volume applied on boot in SIP/Pulse mode on INCA ====
 +
The volume would always be set to 0 no matter what the last configured volume was. This is now fixed, and the configured volume will be kept.
  
−
===MTN-598 INCA station fails to register if Hebrew name is too long===
 
−
More than 12 characters entered causes registration problems
 
  
−
===MTN-702 Handset volume cannot be adjusted in Desktop Video Station===
 
−
The handset volume is not adjusted when using the volume keys on the station, even though it correctly shows the volume bar going up/down in the display. Adjusting handset volume from the StationWeb is OK
 
  
−
===MTN-817 IP Video Desktop does not indicate private/open mode===
+
== Version 2.8.3.0 ==
−
There is no user feedback when changing between open/private mode with C-key, and no indication of what mode the station is currently in.
+
=== New Features===
 +
==== SNOW-191 Support SIP Early Media during 180-Ringing or 183-Session Progress ====
 +
Support playing a media during SIP 180-Ringing or SIP 183 Call progress, instead of a locally generated ringing tone. This is a very common setup in iPBX systems where server shall generate a media to be played during session progress and before call is accepted (e.g. Call queued before answered). Note that we do not fully support RFC3960.  
  
−
===MTN-883 IP Flush (Pulse) shows error 484 when dialing and pressing C===
+
==== SNOW-278 IP Multicast audio support for SIP Intercom ====
−
When start to dial a number and then hit C, error message 484 is shown on the display. The fault appears in Pulse server mode and Pulse client mode.
+
Turbine and INCA IP intercom stations now support IP multicast audio when configured in SIP mode. Up to 10 multicast IP addresses can be configured.
  
−
===MTN-948 Hebrew not displayed correctly in Video Desk display===
+
===Bugfixes and Improvements ===
−
When an AlphaCom system is set to Hebrew language the display in the Video Desk station is not showing Hebrew characters. If station name is written in Latin letters, only 5 or 6 characters are shown. Display is in correct reverse though (right to left).
+
====SNOW-240 StationWeb - inconsistent location of Keyboard Settings page====
 +
Renamed the page to "Keyboard Settings" and moved it to SIP Configuration - for Pulse and SIP mode
  
−
===MTN-970 LCD screen on IP Video Desktop will dim regardless of settings===
 
−
The LCD screen on the IP Video Desktop appears to dim, even though the two settings "Time until Activation" and "Time Until Shutdown" under Screensaver category is set to off and never.
 
  
−
===MTN-1052 PTT does not work between Gateway and INCA station===
 
−
Make a call between Inca and Gateway. Pressing * and # on mobile phone configured on Gateway does not effect conversation direction on INCA.
 
−
If call is made between Turbine and Gateway, PTT works as expected.
 
  
−
===MTN-1290 INCA Off-hook tone if digit pressed during tone test===
 
−
If any digit is pressed or conversation open, it will be mixed with the off-hook tone.
 
  
  
 
[[Category: Release notes]]
 
[[Category: Release notes]]

Latest revision as of 13:31, 28 February 2019

Release info

Name: VSF-INCA
Description: VSF-INCA is a firmware archive for all INCA based Intercom stations including devices: IP Desktop Master Station, IP Substation, IP Vandal Resistant Station, IPARIO and IP Dual Display Station.
The firmware is delivered in two different ZIP archives:

  • A100G80200.02_08_X_X - Used for standard INCA IP Intercom devices
  • A100G802D0.02_08_X_X - Used for IP Dual Display Station

Version: 02.08.3.3
Date: 22.02.2019
Status: General Availability (GA)
Note: Release notes for the Video module component in IP Desktop Station with Video Display (1408001635) can be found in separate document on Vingtor-Stentofon AlphaWiki page IP Desktop with Video Display - Release Notes


Version 2.8.3.3

Bugfixes and Improvements

MTN-2289 Two gong signals applied instead of one for group calls in Pulse mode

This has now been fixed.

Known Issues

MTN-1052 PTT does not work between Gateway and INCA station

Make a call between Inca and Gateway. Pressing * and # on mobile phone configured on Gateway does not effect conversation direction on INCA. If call is made between Turbine and Gateway, PTT works as expected.

MTN-883 IP Flush (Pulse) shows error 484 when dialing and pressing C

When start to dial a number and then hit C, error message 484 is shown on the display. The fault appears in Pulse server mode and Pulse client mode.

MTN-817 IP Video Desktop does not indicate private/open mode

There is no user feedback when changing between open/private mode with C-key, and no indication of what mode the station is currently in.

MTN-482 Transfer function doesn't work with Cisco CCM

When the station is used in SIP mode, connected to a Cisco Call manager (version: 9.1.1.21020-1) the permanent call transfer function does not work. When calling the station, we hear a Cisco Call manager message saying that this number is unreachable. In the Cisco station settings the transfer is not activated.

MTN-598 IP station fails to register if Hebrew name is too long

More than 12 characters entered causes registration problems

MTN-268 Relay follow M-key cannot handle quick M

Relay configured to follow M-key does not handle quick press on M-key


Version 2.8.3.2

New Features

MTN-1213 In-call automatic failover to redundant SIP server

Improvements were done for parallel registration mode with backup SIP domains resulting in automatic and almost instant in-call failover to a backup SIP server. If the station is registered to multiple servers it will try the next server automatically if the call setup fails. If the station fails to register to all available SIP servers, it can be configured with registration retry "burst mode" interval so it gets connected immediately to a first available server.


Version 2.8.3.1

Bugfixes and Improvements

MTN-2044 Wrong volume applied on boot in SIP/Pulse mode on INCA

The volume would always be set to 0 no matter what the last configured volume was. This is now fixed, and the configured volume will be kept.


Version 2.8.3.0

New Features

SNOW-191 Support SIP Early Media during 180-Ringing or 183-Session Progress

Support playing a media during SIP 180-Ringing or SIP 183 Call progress, instead of a locally generated ringing tone. This is a very common setup in iPBX systems where server shall generate a media to be played during session progress and before call is accepted (e.g. Call queued before answered). Note that we do not fully support RFC3960.

SNOW-278 IP Multicast audio support for SIP Intercom

Turbine and INCA IP intercom stations now support IP multicast audio when configured in SIP mode. Up to 10 multicast IP addresses can be configured.

Bugfixes and Improvements

SNOW-240 StationWeb - inconsistent location of Keyboard Settings page

Renamed the page to "Keyboard Settings" and moved it to SIP Configuration - for Pulse and SIP mode

Retrieved from "https://wiki.zenitel.com/w/index.php?title=INCA_2.8_-_Release_Notes&oldid=197814"