GROUP MSG

GM (GROUP_MSG)		0x00A6	166	AMC 11.00
$GM L84 L8191 $GM L85 L8193 U1 U0 U0 $GM L9001 L8192 U10 U0 U0 $GM NG1 N!4 U3 U2 U0			To All Call (84), activate alarm message 1 (8191), no repetitions and use group gong and priority To Group 2 (85), activate alarm message 3 (8193), no repetitions and no gong To Global Group 9001, activate alarm message 2 (8192), 10 repetitions and no gong To Group 1 (84), activate alarm message 4 (8194), 3 repetitions, use gong type 2 (dong-ding)
GROUP_MSG sets up a local or global group call with source prerecorded message. To stop message playback use GROUP_MSG_STOP 30 messages can be queued and is sorted on priority. Messages are removed from queue after playback or by using GROUP_MSG_STOP
1	NET_OBJ_REF {ECL_LOCAL_GROUP, ECL_GLOBAL_GROUP}	Destination local or global group
2	NET_OBJ_REF {ECL_ANNOUNCEMENT, ECL_STATION, ECL_USER}	Initiator station or Announcement message for playback in group. Note: Software AMC 11.5.3.3 is required to support the N!x parameters above 9. Earlier versions work for announcement message 1-9 only (N!1 - N!9).
3	UINT1 (optional)	Prerecorded Message repetitions 0-255. 0 or unspecified means 1 repetition. 255 means repeat indefinitely (use GROUP_MSG_STOP to stop). (If PA bitmap defined, this parameter is overrun by the PA bitmap definition)
4	UINT1 (optional)	Gong type. 0 = no gong. 255 or unspecified = use gong type of group.
5	UINT1 (optional)	Group call priority, default 0 = use priority of group call. 1 = Low, 2 = Medium, 3 = High, 4 = Alarm. "Alarm" priority will activate Volume and Handset Override
6	UINT1 (optional 11.3)	Station allocation priority 1 = Low, 2 = Medium, 3 = High, 4 = Alarm. The initiator station will anyhow be forced to allocation but this priority will be used to block other functions trying to snatch/override the station during the group call.
7	UINT2 (optional 11.3)	Group Call bitmap as used in the PA features parameters are shown below.
8	NET_OBJ_REF {ECL_ANNOUNCEMENT} (optional 11.3)	Announcement used when including initiator station. Useful in combination with PA bitmap.
Response		none

PA Control Bitmap

Param2 is used as a control bitmap. Also used in Param1 of PA activation, multi-step.

BitNo	Weight	Value	Name	Description	Recall	Prestored
0	1	GoGroupCall	0	After the SVP message playback ends the group is disconnected and the initiator station goes back to idle (if not bit 4:1)(default).	Y	Y
			1	After the SVP message playback ends, the group and initiator station proceed to normal Group Call mode. (Use M-key and talk into the group, VP timer will start for use as group call "meet me" reply time out. Can be used for replacing the Gong with a custom SVP message for normal groupcall.) This function will not work in combination with LoopEndless(6)
1	2	DiscPlayback	0	Initiator Station is allowed to disconnect during message playback without stopping the message to the group.(default).	Y	Y
			1	If initiator station disconnect during the playout to group, the message is terminated immediately
2	4	MeetMe	0	"Meet me" (99) is not working and will not affect the SVP message or initiator station during SVP play (default). (If BIT0:1 "meet me" can be used after svp play finished)	Y	Y
			1	"Meet me" during SVP play will disconnect the SVP message and establish connection to initiator. If initiator is disconnected due to AutoDisconnect(3) or CHookDispatch(5) "Meet me" will not work.
3	8	AutoDisconnect	0	Initiator station listen to the SVP message together with the rest of the group (Default).	Y	Y
			1	Initiator station disconnect automatic before gong and SVP message start to play. For Recall it means that 8 dispatches the message, while the initiator is disconnected. ( No "meet me" function, group access level is not checked, event handler "conversation outgoing" is related to station 1. Same behaviour as $GROUP_MSG.)
4	16	reserved	0			Y
			1
5	32	CHookDispatch	0	C key or On Hook cancel ReCall setup (Default)	Y
			1	C key or On Hook dispatch the ReCall message (No "Meet me" function)
6	64	LoopEndless	0	SVP message play once (Default)		Y
			1	Only if DiscPlayback = 1: SVP message is endless repeated
7	128	NoGong	0	Use default group gong (Default)	Y	Y
			1	No gong
8	256	GlobalGroup	0	Local Group call	Y	Y
			1	Global Group call
9	512	AutoM	0	Manuel M-key use	Y
			1	Auto M-key, Use in combination with CHookDispatch=1. (implemented 10.61.1.4) May be used alone from SIP or telephone: Pres # to end recording, 8 to dispatch.
10	1024	MPlayCntr	0	Standard message playback	Y	Y
			1	The message is played back while M-key is pressed, M release will stop playback, new M-pres will restart message.
11	2048	MultiGroup	0	Standard multi step feature	Y	Y
			1	Allow multiple groups to be selected

Back to AlphaNet message list