|
|
(60 intermediate revisions by 2 users not shown) |
Line 1: |
Line 1: |
− | [[Image:IP MASTER STATION KIT.jpg|thumb|250px]] | + | {{AEIPS}} |
| + | [[Image:IP Master Station Kit.PNG|thumb|250px|IP Master Station Kit]] |
| + | == Connections == |
| + | * [[IP Flush Connections|Intercom connections]] |
| | | |
− | ==Features== | + | ==Configuration== |
− | * Made for STENTOFON Critical Communication over IP (CCoIP) | + | The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure. |
− | * Supports full keyboard including direct access keys (DAK) and dynamic keys | + | * [[IP Station Configuration - ICX-AlphaCom mode]] |
− | * Supports handset and headset | + | * [[Adding station to existing system (Edge)|IP Station Configuration - Edge mode]] |
− | * Superb audio quality | + | * [[SIP Intercom - Web Interface|IP Station Configuration - SIP mode]] |
− | * 0dB (600 Ohm) output to Public Address
| + | * [[IP Station Configuration - Pulse mode]] |
− | * Relay output for e.g. door lock control and tamper alarm input
| |
− | * Dual Ethernet ports for connection of other IP devices
| |
− | * Remote software upgrade, configuration and monitoring
| |
| | | |
| + | == Restore Factory Defaults and Software Upgrade == |
| + | * [[INCA Station Kit Restore Factory Defaults|Reset to factory settings]] |
| + | * [[INCA Station Software upgrade|Upgrade via the station web interface]] |
| + | * [[IMT - Discover & Upgrade|Upgrade using the IMT tool]] |
| + | * [[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]] |
| + | * [[:Category:INCA Release notes|Software Release Notes]] |
| | | |
− | ==Station Board Description== | + | == Connectors, Indicators and Dimensions == |
− | The IP Master Station Kit 100 8093 000 is delivered as a kit including board 8023, microphone and 2 x 6-pin plug-on screw terminals for local manufacturing of IP-CCoIP stations.
| + | *[[INCA Master Station Kit Board Connectors|Board Connectors]] |
− | The board is also used in STENTOFON standard IP flush mount master stations.
| + | * [[INCA Masterstation PCB LED Indicators|PCB LED Indications]] |
| + | *[[IP Master Station Kit Dimensions & Mounting Instructions|Dimensions]] |
| | | |
− | ==Station Board Connectors== | + | ==Related Articles== |
− | See article: [[IP_Station_Board_Connections_and_Indications#Connections_2|IP Station Board Connections and Indications]]
| + | * [[IP Flush Master Gooseneck]] |
− | | + | * [[IP Flush Master Handset]] |
− | == IP Station Configuration ==
| + | * [[IP SubStations, Acoustical design]] |
− | | |
− | ===IP intercom station web interface===
| |
− | An IP intercom station features an embedded web server, which allows users to log in via a standard web browser.<br>
| |
− | At commissioning, the IP station needs to be configured to make it possible for the IP station to register in an AlphaCom E Exchange.
| |
− | Use the following procedure to connect to the IP station:<br>
| |
− | | |
− | *Connect the LAN port P1 (Eth0) on the IP intercom station to the PC Ethernet port.<br> | |
− | :Use a cross-over Ethernet cable if the PC Ethernet port does not cross, or connect both the PC and the IP intercom station to an Ethernet switch. Power the station with 24 VDC on P3 5/6 if PoE is not available.
| |
| | | |
− | [[Image:IP intercom station web interface.jpg|thumb|130px]]
| + | == Software Requirements == |
− | *Open a web-browser and enter the IP address for the IP station in the address field.
| + | This station is fully supported as form AlphaCom version 10.50 |
− | :'''Default IP address: 169.254.1.100'''
| |
− | *Click on '''Administrator login''' and enter:<br>
| |
− | User name (default: '''admin''') and password (default: '''alphaadmin'''). (For software 01.06 and earlier the username is '''ADMIN''' and password is '''alphacom''').
| |
| | | |
− | <br>
| + | ==Additional Information == |
− | The '''Station Info''' page will now be visible, showing IP station configuration including the MAC-address of the station, which needs to be entered into AlphaPro exchange tool.
| + | * [http://www.zenitel.com/product/ip-master-station-kit Additional Documentation on Zenitel.com] |
| | | |
− | Use the menu bar at the top of each page to browse through the different pages.
| |
| | | |
− | <br>
| |
− | ===CCoIP configuration===
| |
− | *Click on the menu item '''CCoIP configuration''' to access the web page used for configuration of IP parameters.
| |
− |
| |
− | [[Image:IPmatrCColP Station - IP Settings.jpg|thumb|100px]]
| |
− | '''''Registration Settings:'''''<br>
| |
− | *Enter the AlphaCom E node IP address where the IP station shall be a subscriber.
| |
− |
| |
− | '''''CCoIP Station – IP Settings:'''''<br>
| |
− | *'''DHCP''' – Use this option if the IP station shall receive IP Settings from a DHCP server.<br>
| |
− | *'''Static IP''' – Use this option if the IP station shall use a static IP address. Enter the IP-address, subnet mask and gateway address.<br>
| |
− | *Click '''Save configuration''' followed by '''Apply''' to apply the new configuration settings.
| |
− |
| |
− | ==IP intercom station display menu==
| |
− | When the IP station is not connected to an AlphaCom exchange, a local menu is available in the station display. This menu can be used to configure the IP Station. The structure of the menu is listed below:
| |
− |
| |
− | ===Main menu===
| |
− | '''Station info'''<br>
| |
− | {|border="0"
| |
− | |width="70px"|MAC adr:
| |
− | |width="100px"|0013cb000000
| |
− | |-
| |
− | |St IP: ||169.254.1.100
| |
− | |-
| |
− | |AMC IP:|| 169.254.1.5
| |
− | |-
| |
− | |SW ver:|| 01.07 (per. 2009)
| |
− | |}
| |
− |
| |
− |
| |
− | '''IP settings'''
| |
− | {|border="0"
| |
− | |width="70px"|< >
| |
− | |width="100px"|DHCP
| |
− | |width="100px"|(input)
| |
− | |-
| |
− | |<*> ||STATIC|| (input)
| |
− | |-
| |
− | |IPaddr|| 169.254.1.100|| (input)
| |
− | |-
| |
− | |IPmask:|| 255.255.0.0|| (input)
| |
− | |-
| |
− | |IPgw:|| 169.254.1.1|| (input)
| |
− | |}
| |
− |
| |
− | '''''AlphaCom IP'''''
| |
− | {|border="0"
| |
− | |width="70px"|AMC IP:
| |
− | |width="100px"|169.254.1.5
| |
− | |width="70px"|(input)
| |
− | |}
| |
− |
| |
− | <br>
| |
− | '''''Load defaults'''''
| |
− | {|
| |
− | |Press to set. (Station will restart.)
| |
− | |(input)
| |
− | |}
| |
− |
| |
− | <br>
| |
− | '''''Restart'''''
| |
− | {|
| |
− | |width="100"|Press to restart
| |
− | |(input)
| |
− | |}
| |
− |
| |
− | *To enter the menu, press '''Setup''' and use code '''1851''' for sw v.1.07 (code 1234 for sw v.105).<br>
| |
− | *When editing IP-addresses, use the '''M-key''' to insert ”.” (dot).<br>
| |
− | *Restart the station to apply new settings.
| |
− | <br>
| |
− |
| |
− | ==AlphaWeb and AlphaPro==
| |
− | [[Image:IPmatrAlphaWeb and AlphaPro.jpg|thumb|150px]]
| |
− | IP intercom stations communicate with the AlphaCom E exchange via TCP port 50001. This port needs to be configured and enabled in System Configuration > Filters in AlphaWeb.
| |
− |
| |
− | In AlphaPro, tick the IP Station box and enter the IP Station MAC-address. Also, from the station type drop-down menu, choose the correct Station Type (CRM IV, Dual Display Station, OR Station).
| |
− |
| |
− | ==Indication LEDs==
| |
− | See article: [[IP_Station_Board_Connections_and_Indications#Indications_2|IP Station Board Connections and Indications]]
| |
− |
| |
− | ==Reset to factory settings==
| |
− | See article: [[IP_Station_Restore_Factory_Defaults|IP Station Restore Factory Defaults]]
| |
− |
| |
− | ==Dimensions==
| |
− | See article: [[IP_Stations_Dimensions_%26_Mounting_Instructions#IP_Master_Station_Kit|IP Stations Dimensions and Mounting Instructions]]
| |
− |
| |
− | ==Related Articles==
| |
− | * [[Gooseneck Microphone for IP Flush Master]]
| |
− | * [[Handset for IP Flush Master Station]]
| |
− | * [[Licenses#IP_station_license|IP Station License]]
| |
| | | |
− | [[Category: Stations]] | + | [[Category: INCA Stations]] |
− | [[Category: IP Stations]] | + | [[Category: Discontinued Stations]] |
− | [[Category: Vandal Resistant Stations]]
| |