Difference between revisions of "IP Master Station Kit - 1008093000"

Latest revision as of 10:43, 21 November 2023

IP Master Station Kit

Connections

Intercom connections

Configuration

The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.

Restore Factory Defaults and Software Upgrade

Connectors, Indicators and Dimensions

Software Requirements

This station is fully supported as form AlphaCom version 10.50

Additional Information

Additional Documentation on Zenitel.com

@@ Line 1: / Line 1: @@
-[[Image:IP Master Station Kit.PNG|thumb|250px]]
+{{AEIPS}}
+[[Image:IP Master Station Kit.PNG|thumb|250px|IP Master Station Kit]]
+== Connections ==
+* [[IP Flush Connections|Intercom connections]]
-==Features==
+==Configuration==
-*Compatible with STENTOFON AlphaCom, STENTOFON Pulse and iPBXs (SIP)
+The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.
-*Master station PCB made for Critical Communication over IP (CCoIP®) in custom made station housings
+* [[IP Station Configuration - ICX-AlphaCom mode]]
-*Superb audio technology – gives loud-speaking hands-free duplex communication from any location in the room
+* [[Adding station to existing system (Edge)|IP Station Configuration - Edge mode]]
-*Remote software upgrade, configuration and monitoring
+* [[SIP Intercom - Web Interface|IP Station Configuration - SIP mode]]
-*Integrated data switch with advanced networking and security functions
+* [[IP Station Configuration - Pulse mode]]
-*Powered from the IP network cable using Power over Ethernet (PoE)
-*Supports large high contrast display with white backlight for excellent readability
-*Supports handset and headset
-*Supports full keyboard
-*Supports digital inputs and output via built-in relay
-*Supports external audio amplifiers
+== Restore Factory Defaults and Software Upgrade ==
+* [[INCA Station Kit Restore Factory Defaults|Reset to factory settings]]
+* [[INCA Station Software upgrade|Upgrade via the station web interface]]
+* [[IMT - Discover & Upgrade|Upgrade using the IMT tool]]
+* [[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
+* [[:Category:INCA Release notes|Software Release Notes]]
-==Station Board Description==
+== Connectors, Indicators and Dimensions ==
-The IP kit supports open standards and is compatible with STENTOFON AlphaCom, STENTOFON Pulse and iPBXs using SIP technology. When working in AlphaCom mode, the IP kit supports special services only available using the STENTOFON CCoIP protocol, AlphaCom server. Examples of services are emergency broadcast with volume override, CCTV integration, call priority, and AlphaNet multisite networking and STENTOFON event scripting.<br/>
+*[[INCA Master Station Kit Board Connectors|Board Connectors]]
-The STENTOFON IP master Station Kit features the electronics board as used in STENTOFON IP master stations. It is designed to produce custom IP stations to the highest specifications and for use in the harshest of environments.<br/>
+* [[INCA Masterstation PCB LED Indicators|PCB LED Indications]]
-The IP master Station Kit provides upto 1.5 W audio output. If even higher audio output is required an external power amplifier can be used. As a special function, the PCB can extract power from the Ethernet’s
+*[[IP Master Station Kit Dimensions & Mounting Instructions|Dimensions]]
-PoE circuit and give upto 6 W power to external units. This means that the P cb can power an external
-power amplifier using its own PoE.<br/>
-The PCB has one relay output and three logical inputs. These outputs can for instance be used to control and open a door or PA interface. The operation of the outputs and inputs are programmable and controlled
-by the AlphaCom XE exchange. The IP station PCB has an integrated managed data switch providing advanced networking and security features. The integrated switch provides support for:
-*Protection from unwanted access
-*Quality of Service (QoS) by managing data traffic
-*Increased system availability through redundant LAN infrastructure
-*Cost efficient installation by providing shared network connections
-<br/>
-To provide maximum availability the station comes with advanced supervision functions. The station line test will detect if there is any faults in the network or station electronics. In addition the station supports tone test, testing the complete transmission path including microphone and speaker. The status of the stations is reported to AlphaWeb as well as to 3rd party management systems using SNMP, SysLog or OPC.
-==Station Board Connectors and LED Indications==
+==Related Articles==
-See article: [[IP_Station_Board_Connections_and_Indications#8023_-_IP_Master_Station|IP Station Board Connections and Indications]]
+* [[IP Flush Master Gooseneck]]
+* [[IP Flush Master Handset]]
+* [[IP SubStations, Acoustical design]]
-== IP Station Configuration ==
+== Software Requirements ==
-See article: [[IP Station Configuration]]
+This station is fully supported as form AlphaCom version 10.50
-==Reset to factory settings==
+==Additional Information ==
-See article: [[IP_Station_Restore_Factory_Defaults|IP Station Restore Factory Defaults]]
+* [http://www.zenitel.com/product/ip-master-station-kit Additional Documentation on Zenitel.com]
-==Software Upgrade==
-See article: [[IP Station Software upgrade]]
-==Dimensions==
-See article: [[IP_Stations_Dimensions_%26_Mounting_Instructions#IP_Master_Station_Kit|IP Stations Dimensions and Mounting Instructions]]
-==Related Articles==
-* [[Gooseneck Microphone for IP Flush Master]]
-* [[Handset for IP Flush Master Station]]
-* [[Licenses#IP_station_license|IP Station License]]
-[[Category: Stations]]
+[[Category: INCA Stations]]
-[[Category: IP Stations]]
+[[Category: Discontinued Stations]]
-[[Category: Vandal Resistant Stations]]