Difference between revisions of "ENA Amplifier - Report faults to Display Station"
From Zenitel Wiki
Line 1: | Line 1: | ||
− | {{A}} | + | {{A}}[[File:ENA Error to display.png|thumb|500px|right|Amplifier faults, such as Speaker Line errors, can be reported to display stations]] |
− | [[File:ENA Error to display.png|thumb|500px|right|Amplifier faults, such as Speaker Line errors, can be reported to display stations]] | + | |
Faults in the ENA Amplifier can be reported to a display station, e.g. to [[IP Desktop Master Station - 1008001000|IP Desktop]], [[IP Dual Display Station - 1008007000|DualDisplay]] or [[CRM V - Control Room Master|CRMV station]]. This is achieved by using [[Station Fault (Event Type)|event 43 - Station Fault Report]], which is triggered whenever the ENA amplifier reports a fault. | Faults in the ENA Amplifier can be reported to a display station, e.g. to [[IP Desktop Master Station - 1008001000|IP Desktop]], [[IP Dual Display Station - 1008007000|DualDisplay]] or [[CRM V - Control Room Master|CRMV station]]. This is achieved by using [[Station Fault (Event Type)|event 43 - Station Fault Report]], which is triggered whenever the ENA amplifier reports a fault. | ||
Revision as of 12:06, 12 April 2018
Faults in the ENA Amplifier can be reported to a display station, e.g. to IP Desktop, DualDisplay or CRMV station. This is achieved by using event 43 - Station Fault Report, which is triggered whenever the ENA amplifier reports a fault.
In order to have one common event for all ENA amplifiers, include the amplifiers in an UDP Group. Here UDP Group 3 is used as an example.
In AlphaPro, select Exchange & System > Events, and Insert a new event with the following properties:
Action Command:
IF %chg(1,0) $STM %1.ref L164 U%op(70,+,%sev) '(%1.dir) %2.nam' STOP ENDIF $CANM %1.ref L164 NM253 U%op(70,+,%sev)
The Event string will send a station-mail ($STM) to station 164 for all new fault codes. When a fault is reported "OFF" the mail message is automatically deleted. ($CANM)
The priority of the mail will be the fault type + 70. The mail text will contain the directory number of the amplifier and the default fault text.