Actions

Difference between revisions of "Licensing in IC-EDGE"

From Zenitel Wiki

(→‎Installing a licence)
(→‎Pulse License Activation Code and License Keys)
Line 3: Line 3:
  
 
This article describes the "Generation 3" licening, supported by [[:Category:Stations#Turbine_stations|Turbine stations]] ver. 4.7 and higher. For licenseing in previous versions of Turbine software, and for the [[:Category:Stations#INCA_stations|INCA Station platform]], see [[Pulse Licensing - Generation 1 and 2]].
 
This article describes the "Generation 3" licening, supported by [[:Category:Stations#Turbine_stations|Turbine stations]] ver. 4.7 and higher. For licenseing in previous versions of Turbine software, and for the [[:Category:Stations#INCA_stations|INCA Station platform]], see [[Pulse Licensing - Generation 1 and 2]].
−
 
−
==Pulse License Activation Code and License Keys==
 
−
=== General ===
 
−
Zenitel generates a ‘License Activation Code’ (LAC) which can be regarded as the actual article. In order for Zenitel to be able to generate the actual License Key, the License Activation Code must be registered at Zenitel together with the MAC-address of the station that serves as a Pulse server.
 
−
 
−
Registration can be done by reporting the MAC-address and LAC in an e-mail to '''licensing@zenitel.com'''. More than one LAC can be listed on the registration form. All listed License Activation Codes together with the MAC address will be used to generate a ''single'' License Key which will enable all licensed functions.
 
−
 
−
The License Key will be shipped to the customer’s e-mail address. As the License key is rather complex, it should be inserted in the set-up program using the copy/paste function.
 
  
 
== Available licenses ==
 
== Available licenses ==

Revision as of 13:08, 29 March 2019

Edge-icon.jpg

Some Pulse features require a software license key. The license key is linked to the MAC address of the Pulse Server.

This article describes the "Generation 3" licening, supported by Turbine stations ver. 4.7 and higher. For licenseing in previous versions of Turbine software, and for the INCA Station platform, see Pulse Licensing - Generation 1 and 2.

Available licenses

The following licenses are available:

License Item Number Comments
Intercom Extension 100 9661 001 License for additional Vingtor-Stentofon devices beyond 32. One license per device. Note that the first 32 devices do not require any license
SIP Client Extension 100 9661 201 License for 3rd party SIP telephone. One license per phone
TelTrunk 100 9662 001 License for GSM telephone gateway and Analog telephone gateway. One license per gateway


Installing a licence

To insert a license:

  • Obtain the license key from your local supplier
  • Log on to the Edge Controller
  • Select Edge Controller > Licensing
  • In the New License field enter a valid license code, then Activate License
License for 4 SIP devices installed



Note icon
  • From factory there is a 60-day free license period during which SIP devices can be used without the need of any license.
  • When the free license period expires there must be a valid license installed, if not the SIP device will cease to operate


Free License period

Pulse comes with a 60-day Grace period where all the functions can be tested without the need to purchase any license. Total available clients and trunks can be configured. Grace timer starts running when station is connected for first time. Timer is running only when station is running. Factory reset and firmware upgrade will not reset the Grace period timer.

Grace period timer is visible under:

  • Station Administration > Licensing
  • Server Management > Server Monitoring
Grace period shown in web interface


Retrieved from "https://wiki.zenitel.com/w/index.php?title=Licensing_in_IC-EDGE&oldid=201071"