Difference between revisions of "VSIS-4.11 Release"
From Zenitel Wiki
(→Vingtor-Stentofon Intercom Suite 4.11) |
(→Vingtor-Stentofon Intercom Suite 4.11) |
||
Line 1: | Line 1: | ||
== Vingtor-Stentofon Intercom Suite 4.11 == | == Vingtor-Stentofon Intercom Suite 4.11 == | ||
+ | The VS-IS 4.11 package is a collection of software | ||
+ | |||
Package content: | Package content: | ||
* Turbine ver. 4.11.3.0 - Firmware for [[:Category:Stations#Turbine_stations|Turbine intercoms]] | * Turbine ver. 4.11.3.0 - Firmware for [[:Category:Stations#Turbine_stations|Turbine intercoms]] |
Revision as of 10:37, 5 April 2019
Contents
- 1 Vingtor-Stentofon Intercom Suite 4.11
- 2 Major New Features
- 2.1 ONVIF Profile-S support on TCIV
- 2.2 Dual-stream functionality on TCIV
- 2.3 RTSP support for TCIV video stream
- 2.4 RTSP audio stream support for all Turbine devices
- 2.5 RTSP support for TCIV H.264 stream for AlphaCom systems
- 2.6 ITSV-1 new features and improvements
- 2.7 Image quality improvements for TCIV
- 2.8 Lip-sync of Audio and Video on TCIV
- 2.9 Keep-alive for improved VoIP NAT traversal
- 2.10 IP Station support for RFC3891 SIP “Replaces” Header
- 2.11 IP Multicast audio support for Pulse Intercom
- 2.12 Chinese font on Turbine OLED display
- 2.13 TCIV-5, TKIE-3 and IP-LCM firmware support
- 2.14 Advanced GPO configuration for Pulse and SIP
- 2.15 New DAK call actions
- 2.16 VS-IMT new functions and improvements
- 3 Hoe to Upgrade
Vingtor-Stentofon Intercom Suite 4.11
The VS-IS 4.11 package is a collection of software
Package content:
- Turbine ver. 4.11.3.0 - Firmware for Turbine intercoms
- INCA ver. 2.9.3.0 - Firmware for INCA intercoms
- VS-IMT ver. 1.4.3.5 - Intercom Management tool for PC
- VS-Client ver. 1.3.3.2 - Soft Client for PULSE systems
Major New Features
ONVIF Profile-S support on TCIV
TCIV now fully supports and is compliant with the ONVIF Profile-S specification. As an industry standard, Profile-S can be used to integrate with a variety of VMS and NVR products. Both video and audio 1-way streaming is available.
Dual-stream functionality on TCIV
TCIV now supports dual-streaming functionality, with which two independent video streams can be separately initiated and controlled. Streams can be configured with different protocols (SIP, RTSP, ONVIF, HTTP), different codecs and resolutions, and are both lip-synced if audio and video are being used, using the industry-standard RTCP protocol.
RTSP support for TCIV video stream
RTSP is an industry-standard network control protocol for establishing and controlling media streams. TCIV now comes with full support for RTSP video streams.
RTSP audio stream support for all Turbine devices
RTSP is an industry-standard network control protocol for establishing and controlling media streams. All Turbine intercom devices and kits now fully support RTSP for outgoing audio streams.
RTSP support for TCIV H.264 stream for AlphaCom systems
Added RTSP H.264 support on ITSV-1 to initiate video stream from TCIV in AlphaCom mode.
ITSV-1 new features and improvements
ITSV-1 has an Integrated Video preview function with TCIV and other third-party IP cameras (SIP, Pulse and AlphaCom). We have increased the number of available RTSP or HTTP MJPEG stream clients to 100. We shortened the registration interval to align it with our Pulse system. In line with our Cybersecurity strategy, constraint mode is now enabled by default, so some more advanced configuration options and tools are put behind password protection.
Image quality improvements for TCIV
Low-level optimizations were made for the AEWB engine (Automatic Exposure and White Balancing), resulting in the following image-quality improvements: better low-light performance, better overall color accuracy and contrast, and smoother, dynamic dark-light transitions.
Lip-sync of Audio and Video on TCIV
Audio and Video streams initiated using ONVIF or RTSP protocols are lip-synced for both streaming and recording, implemented using the industry-standard RTP Control Protocol (RTCP).
Keep-alive for improved VoIP NAT traversal
NAT keep-alive is a feature that sends very tiny UDP data packets from a VoIP client to the router to show that the port is still in use. Turbine are now sending keep-alives every 25 seconds.
IP Station support for RFC3891 SIP “Replaces” Header
IP Stations now support Reinvite / INVITE with replaces, which is a quite common function used in SIP environments. The needed function is described in RFC3891.
IP Multicast audio support for Pulse Intercom
IP intercom stations now support IP multicast audio when configured in Pulse mode. Previously, only SIP mode was supported. Up to 10 multicast IP addresses can be configured.
Chinese font on Turbine OLED display
Turbine now supports Chinese language characters with a new font package. Our new vsf- chinese-font_x.x.x.x_armel.ipk package can be installed on Turbine stations. (You can find the download on AlphaWiki.)
TCIV-5, TKIE-3 and IP-LCM firmware support
Turbine firmware now supports our new TCIV-5, TKIE-3 and IP-LCM models.
Advanced GPO configuration for Pulse and SIP
Turbine now has the option to use standard Relay configuration or to use the new, more advanced GPO (output) configuration.
New DAK call actions
These new call actions have been added under DAK settings: Hold Call and Defer Call.
VS-IMT new functions and improvements
We have added support for new Video, RTSP and ONVIF settings, syslog configuration, new DAK call actions and other smaller improvements.
Hoe to Upgrade
All Turbine and INCA stations are ready for upgrade to VS-IS 4.11 software, and, with the VS-IMT upgrade tool, the process should be straight-forward. Please consult documentation before upgrading.
AVAILABILITY The software download is available on Zenitel-Wiki.
DOCUMENTATION AND ADDITIONAL RESOURCES For details on all changes in this release, please visit the Release notes for 4.11 page on the Zenitel’s AlphaWiki.
On the Zenitel’s AlphaWiki you will also find some new articles related to the new video features and how to guidelines for some VMSes: https://wiki.zenitel.com/wiki/Turbine_Video_Settings https://wiki.zenitel.com/wiki/RTSP_and_ONVIF_Settings_(TCIV_Station) https://wiki.zenitel.com/wiki/Adding_TCIV_ONVIF_camera_to_Avigilon_Control_Center https://wiki.zenitel.com/wiki/Adding_TCIV_ONVIF_camera_to_Genetec_Security_Center https://wiki.zenitel.com/wiki/Adding_TCIV_ONVIF_camera_to_Milestone https://wiki.zenitel.com/wiki/Adding_TCIV_ONVIF_camera_to_Pelco_VideoXpert_Professional https://wiki.zenitel.com/wiki/Adding_TCIV_ONVIF_camera_to_Symmetry_CompleteView
YOUR FEEDBACK The Zenitel R&D team welcomes any customer or partner feedback regarding this release. Feel free to provide information directly to the contact emails below: Zenitel Support Team at alphasupport@zenitel.com.
Note! Only a limited set of new functions are available for INCA intercoms. New INCA functions from table above are item 9, 10 and 11.