Difference between revisions of "Software Upgrade (Edge)"
From Zenitel Wiki
(→Upgrade procedure - INCA devices) |
(→Upgrade from the Edge Controller) |
||
Line 17: | Line 17: | ||
# The firewall on the laptop must '''not''' blocking incoming ping/ICMP (Turbine station is pinging TFTP Server during update process) | # The firewall on the laptop must '''not''' blocking incoming ping/ICMP (Turbine station is pinging TFTP Server during update process) | ||
<br> | <br> | ||
− | |||
− | |||
=== Upgrade procedure === | === Upgrade procedure === |
Revision as of 14:58, 12 April 2019
The software of the Vingtor-Stentofon devices in an IC-EDGE System can be mass upgraded in two ways. Either:
- by using the VS-IMT tool
- from the Edge Controller
Contact support.usa@zenitel.com to get the latest software version for Edge devices.
Contents
Upgrade using the VS-IMT tool
For a detailed procedure, see the VS-IMT Upgrade Stations
Upgrade from the Edge Controller
Prerequisites
- A TFTP Server must be available. A TFTP server can be downloaded from here: http://tftpd32.jounin.net/tftpd32_download.html.
- Unzip the software package and store the files in a folder on your laptop.
- The firewall on the laptop must not blocking incoming ping/ICMP (Turbine station is pinging TFTP Server during update process)
Upgrade procedure
- Start the TFTP server program and click Browse, and select the folder where the software files are located
- Start a web browser (e.g. Firefox or Chrome), and Log on to the Edge Controller. Select Edge Controller > Software Upgrade
- Enter the IP address of the TFTP server (I.e. the IP address of your PC)
- Enter the Image File name, e.g vsft-5.0.3.0, select which stations to upgrade, and click Upgrade.
The upgrade procedure takes about 3 minutes. The process can be monitored by clicking the Log viewer tab in the TFTP server program.
If video is not working after having upgraded the Turbine Video Station TCIV-x to firmware version 4.11, see article TCIV - No video after upgrading to v. 4.11 |