Difference between revisions of "Software Upgrade (Edge)"
From Zenitel Wiki
(→Upgrade from the Edge Controller) |
(→Upgrade procedure) |
||
| Line 26: | Line 26: | ||
* Start a web browser (e.g. Firefox or Chrome), and [[Logging into an IP Station|Log on to the Edge Controller]]. Select '''Edge Controller''' > '''Software Upgrade''' | * Start a web browser (e.g. Firefox or Chrome), and [[Logging into an IP Station|Log on to the Edge Controller]]. Select '''Edge Controller''' > '''Software Upgrade''' | ||
* Enter the IP address of the '''TFTP server''' (I.e. the IP address of your PC) | * Enter the IP address of the '''TFTP server''' (I.e. the IP address of your PC) | ||
| − | * Enter the '''Image File''' name, e.g '''vsft-5.0.3.0''', | + | * Enter the '''Image File''' name, e.g '''vsft-5.0.3.0''' |
| + | * When updating INCA devices, also a checksum must be entered. | ||
| + | * Select which stations to upgrade, and click '''Upgrade'''. | ||
[[File:Edge SoftwareUpgrade.PNG|thumb|left|700px|Enter TFTP server, firmware and check which stations to upgrade]] | [[File:Edge SoftwareUpgrade.PNG|thumb|left|700px|Enter TFTP server, firmware and check which stations to upgrade]] | ||
Revision as of 15:00, 12 April 2019
|
This article is under construction! |
The software of the Vingtor-Stentofon devices in an IC-EDGE System can be mass upgraded in two ways. Either:
- by using the VS-IMT tool
- from the Edge Controller
Contact support.usa@zenitel.com to get the latest software version for Edge devices.
Contents
Upgrade using the VS-IMT tool
For a detailed procedure, see the VS-IMT Upgrade Stations
Upgrade from the Edge Controller
Prerequisites
- A TFTP Server must be available. A TFTP server can be downloaded from here: http://tftpd32.jounin.net/tftpd32_download.html.
- Unzip the software package and store the files in a folder on your laptop.
- The firewall on the laptop must not blocking incoming ping/ICMP (Turbine station is pinging TFTP Server during update process)
Upgrade procedure
- Start the TFTP server program and click Browse, and select the folder where the software files are located
- Start a web browser (e.g. Firefox or Chrome), and Log on to the Edge Controller. Select Edge Controller > Software Upgrade
- Enter the IP address of the TFTP server (I.e. the IP address of your PC)
- Enter the Image File name, e.g vsft-5.0.3.0
- When updating INCA devices, also a checksum must be entered.
- Select which stations to upgrade, and click Upgrade.
The upgrade procedure takes about 3 minutes. The process can be monitored by clicking the Log viewer tab in the TFTP server program.
|
Do not unplug devices during the upgrade! |
|
If video is not working after having upgraded the Turbine Video Station TCIV-x to firmware version 4.11, see article TCIV - No video after upgrading to v. 4.11 |