Difference between revisions of "IP Hotline Station - 1008070010"
From Zenitel Wiki
(→Configuration) |
|||
Line 8: | Line 8: | ||
The IP Hotline can operate in three different modes, depending on what kind of server it should register to. Choose one of the links below according to what mode you need to configure. | The IP Hotline can operate in three different modes, depending on what kind of server it should register to. Choose one of the links below according to what mode you need to configure. | ||
− | *[[ | + | * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] |
*[[Adding station to existing system (Edge)|Edge mode]] | *[[Adding station to existing system (Edge)|Edge mode]] | ||
*[[SIP Intercom Configuration|SIP mode]] | *[[SIP Intercom Configuration|SIP mode]] |
Revision as of 08:09, 25 March 2021
Contents
Connections
Configuration
The IP Hotline can operate in three different modes, depending on what kind of server it should register to. Choose one of the links below according to what mode you need to configure.
Station specific configuration for the IP Hotline Station:
- Configuration of IP Hotline Station - AlphaCom mode
- Configuration of IP Hotline Station - Pulse and SIP mode
- Configuration of IP Hotline Station - Pulse and SIP mode
Restore Factory Defaults and Software Upgrade
- Restore Factory Defaults
- Upgrade via the station web interface
- Upgrade using the IMT tool
- Automatic Software Upgrade (SIP mode only)
Connectors, Indicators and Dimensions
Software Requirements
This station is fully supported as from AlphaCom version 11.2.3.11