Revision as of 09:32, 8 September 2023

Previous Release - VSF-Fortitude8 7.5 Release Notes

This document provides the release notes for VSF-Fortitude8 8.0 with incremental bug fix releases. The release notes for VSF-Fortitude8 8.0 describe new features, improvements and issues fixed after VSF-Fortitude8 7.5.3.1.

Release info

Name: VSF-Fortitude8
Description: VSF-Fortitude8 is a firmware for Turbine Plus Intercoms including the following devices: TCIV-2+, TCIV-3+, TCIV-5+, TCIV-6+, TKIV+ and TMIV-1+

The firmware is delivered in two different files:

vsff8-8.0.3.x - Used for standard in-field upgrades
vsff8-prod-8.0.3.x - Used in production- and recovery upgrades.

Version: 8.0.3.0
Date: 07.09.2023
Status: General Availability

VSF-FORTITUDE8 8.0.3.0

Improvements

MTN-2448 Support for uploading HTTPS certificates

A more user friendly approach to allow end-user to generate the CSR, and to upload HTTPS certificate to the devices.

DS-592 OpenSSL upgraded to 3.0

OpenSSL has been upgraded to the latest LTS version.

Issues fixed

MTN-4206 SIP H.264 video calls are now working properly with Genetec Sipelia and Cisco

There was an issue with SIP H.264 video calls with Genetec Sipelia and Cisco, this is now fixed.

MTN-4181 Report DAK and Report station call events as Digital Input in ONVIF options are now working for Hanwha VMS

There was an issue with how Report DAK and Report station call events as Digital Input in ONVIF options were behaving in Hanwha VMS, this is now fixed and they work as expected.

MTN-4176 AVC config now shown under Audio Settings

AVC config was missing on 7.5 version. This is fixed, AVC is now visible and configurable.

MTN-4072 JQuery version update to version 3.6.4

Now the Station Web is running newer JQuery version with included JQuery migrate to support some of the older functions.

Known Issues

MTN-4121 Known issue: Asterisk discards alternative profiles

Default setting for ITSV-5 sends 3 types (BP & MP & HP). However, Asterisk discards all but the first profile it receives (HP in this case). Since only the "Baseline profile" is supported on the device the video doesn't load. A workaround to this issue is to select "Baseline profile" as the H.264 profile type on the ITSV-5.

The issue has been reported and documented here: https://issues.asterisk.org/jira/browse/ASTERISK-29182

@@ Line 28: / Line 28: @@
 ==Issues fixed==
-=== MTN-4167 Upgrade of IPDM-V2_P now possible===
+=== MTN-4206 SIP H.264 video calls are now working properly with Genetec Sipelia and Cisco===
-Hardware revision 2 of the IPDM-V2_P failed to upgrade. This is resolved, and you can now upgrade to 7.5.3.1 or newer versions. Note that it is not possible to downgrade to versions older than 7.5.3.1.
+There was an issue with SIP H.264 video calls with Genetec Sipelia and Cisco, this is now fixed.
-=== MTN-4148 Circle showing PTZ location is now visible again===
+=== MTN-4181 Report DAK and Report station call events as Digital Input in ONVIF options are now working for Hanwha VMS===
-In image settings for video devices, the circle showing PTZ location was not showing. this is now fixed.
+There was an issue with how Report DAK and Report station call events as Digital Input in ONVIF options were behaving in Hanwha VMS, this is now fixed and they work as expected.
-=== MTN-4056 It's now possible to disable OPTIONS timeout in Edge mode===
+=== MTN-4176 AVC config now shown under Audio Settings===
-Added a text field to disable or change the timeout for SIP OPTIONS when in Edge mode. Setting the timeout to 0 disables it. This option is analog to the one provided in SIP mode.
+AVC config was missing on 7.5 version. This is fixed, AVC is now visible and configurable.
-=== MTN-4047 It’s now possible to use W as the second letter in a password===
+=== MTN-4072 JQuery version update to version 3.6.4===
-The issue was that with W as second letter in a password you could not get access to the video configuration page on the device web. This is now fixed.
+Now the Station Web is running newer JQuery version with included JQuery migrate to support some of the older functions.
-=== MTN-4000 RTSP can now be enabled or disabled===
-RTSP stream can be manually enabled or disabled (it's enabled by default), when disabled all RTSP related settings get grayed out (disabled).
-=== MTN-3941 Accepting and responding with correct payload type===
-When receiving a video call, the TCIV+ would respond 200 OK with a Payload type which was different from the Payload type actually used. This could sometimes cause video issues such as late or no video at all.
 <br>

Difference between revisions of "VSF-Fortitude8 8.0 Release Notes"

From Zenitel Wiki