Difference between revisions of "TCIA-2"
From Zenitel Wiki
(→Getting started) |
|||
| Line 1: | Line 1: | ||
THIS PAGE IS UNDER CONSTRUCTION | THIS PAGE IS UNDER CONSTRUCTION | ||
| − | |||
| − | |||
The TCIA-2 is an IP based intercom with an analog frontboard intended for areas where exposure of the physical network is unwanted. | The TCIA-2 is an IP based intercom with an analog frontboard intended for areas where exposure of the physical network is unwanted. | ||
| Line 11: | Line 9: | ||
== Connecting the TKIA-2 and TKIS-2 == | == Connecting the TKIA-2 and TKIS-2 == | ||
| + | [[File:TCIA-2 Connection 1.png|thumb|right|500px]] | ||
| + | |||
The 8-wire cable provided is used for connecting the TKIA-2 Gateway to the TKIS-2 Intercom. The colorcoded wires serve as a visual aid to connecting to the correct pins at both ends. | The 8-wire cable provided is used for connecting the TKIA-2 Gateway to the TKIS-2 Intercom. The colorcoded wires serve as a visual aid to connecting to the correct pins at both ends. | ||
Revision as of 11:07, 22 February 2019
THIS PAGE IS UNDER CONSTRUCTION The TCIA-2 is an IP based intercom with an analog frontboard intended for areas where exposure of the physical network is unwanted.
Contents
Getting started
Connecting the TKIA-2 and TKIS-2
The 8-wire cable provided is used for connecting the TKIA-2 Gateway to the TKIS-2 Intercom. The colorcoded wires serve as a visual aid to connecting to the correct pins at both ends.
Using the 8-wire cable, connect the pins on the TKIA-2 to the corresponding pins on the TKIS-2 according to the drawing.
Configuration
The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.
Restore Factory Defaults and Software Upgrade
- Restore Factory Defaults
- Upgrade via the station web interface
- Upgrade using the IMT tool
- Automatic Software Upgrade (SIP mode only)