Manually Added Devices (Edge)

This article is under construction!

The following devices are not automatically discovered by the Edge Controller, and must be manually added to the IC-EDGE System:

Device	Device type	Comments
Turbine or INCA Stations on remote subnet	Vingtor-Stentofon Device	Vingtor-Stentofon Devices located on a different subnet than the Edge Controller are not automatically discovered by the Edge Controller, and must be manually added
ITSV-1 phone	Vingtor-Stentofon Device	License for 3rd party SIP telephone. One license per phone
3rd party SIP devices	3rd party SIP	Any 3rd party SIP device (SIP phone, softphone, SIP Speaker etc) must be manually added to the system
SIP Telephone gateways	Gateway	GSM telephone gateway and Analog telephone gateway s must be manually added.

• Vingtor-Stentofon Device
  • Turbine or INCA Stations on a different subnet than the Edge Controller
  • The ITSV-1 phone
• Vingtor-Stentofon Client - Windowsbased softclient for Edge
• 3rd party SIP - 3rd party SIP devices
• Gateway - SIP Telephone gateways for GSM network or fixed PSTN line

When you add a new device, it will automatically be assigned a number and name, which can be modified as required.

• From Edge Controller > System Configuration > Directory, under the Manually Added Devices section, press the "+" button
• Select from the dropdown list the type of device you want to add
• Modify Number and Name as required
• Optionally one can add a SIP Password. If a password is entered, one have to also manually configure the same password in the device it self. The password is used for the registration proccess.
• Press Save to store the new device in the Edge Controller

Adding new devices to the Edge System

Manually Added Devices must be configured by logging on to the device it self and do the neccessary settings