Difference between revisions of "Software Upgrade (Edge)"
From Zenitel Wiki
(→Upgrade procedure - Turbine devices) |
|||
| Line 32: | Line 32: | ||
4. Enter the image file name, e.g '''vsft-5.0.3.0''', and click '''Save settings'''. Wait a few seconds for the page to refresh, then press '''Upgrade'''. This process will upgrade the station firmware. | 4. Enter the image file name, e.g '''vsft-5.0.3.0''', and click '''Save settings'''. Wait a few seconds for the page to refresh, then press '''Upgrade'''. This process will upgrade the station firmware. | ||
| − | [[File: | + | [[File:Edge SoftwareUpgrade.PNG|thumb|left|700px|Load '''vsft-4.11.3.0''' to upgrade the station firmware]] |
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
Revision as of 14:50, 12 April 2019
|
This article is under construction! |
The software of the Vingtor-Stentofon devices in an IC-EDGE System can be mass upgraded in two ways. Either:
- by using the VS-IMT tool
- from the Edge Controller
Contact support.usa@zenitel.com to get the latest software version for Edge devices.
Contents
Upgrade using the VS-IMT tool
For a detailed procedure, see the VS-IMT Upgrade Stations
Upgrade from the Edge Controller
Prerequisites
- A TFTP Server must be available. A TFTP server can be downloaded from here: http://tftpd32.jounin.net/tftpd32_download.html.
- Unzip the software package and store the files in a folder on your PC.
- Check if your local firewall is not blocking incoming ping/ICMP (Turbine station is pinging TFTP Server during update process)
The upgrade procedure is slightlty different depending on if it is a Turbine device or an INCA device.
Upgrade procedure - Turbine devices
1. Start the TFTP server program and click Browse, and select the folder where the software files are located
2. Start a web browser (e.g. Firefox or Chrome), and Log on to the Edge Controller. Default login credentials are admin and alphaadmin. Select Edge Controller > Software Upgrade
3. Enter the IP address of the TFTP server (I.e. the IP address of your PC)
4. Enter the image file name, e.g vsft-5.0.3.0, and click Save settings. Wait a few seconds for the page to refresh, then press Upgrade. This process will upgrade the station firmware.
The upgrade procedure takes about 3 minutes. The process can be monitored by clicking the Log viewer tab in the TFTP server program.
|
If video is not working after having upgraded the Turbine Video Station TCIV-x to firmware version 4.11, see article TCIV - No video after upgrading to v. 4.11 |