Software Upgrade (Edge)

This article is under construction!

The software of the Vingtor-Stentofon devices in an IC-EDGE System can be mass upgraded in two ways. Either:

• by using the VS-IMT tool
• from the Edge Controller

Contact support.usa@zenitel.com to get the latest software version for Edge devices.

Upgrade using the VS-IMT tool

For a detailed procedure, see the VS-IMT Upgrade Stations

Upgrade from the Edge Controller

Prerequisites

1. A TFTP Server must be available. A TFTP server can be downloaded from here: http://tftpd32.jounin.net/tftpd32_download.html.
2. Unzip the software package and store the files in a folder on your PC.
3. Check if your local firewall is not blocking incoming ping/ICMP (Turbine station is pinging TFTP Server during update process)

The upgrade procedure is slightlty different depending on if it is a Turbine device or an INCA device.

Upgrade procedure - Turbine devices

• Start the TFTP server program and click Browse, and select the folder where the software files are located

TFTP Server - Browse to the folder where the software files are located

• Start a web browser (e.g. Firefox or Chrome), and Log on to the Edge Controller. Select Edge Controller > Software Upgrade
• Enter the IP address of the TFTP server (I.e. the IP address of your PC)
• Enter the Image File name, e.g vsft-5.0.3.0, select which stations to upgrade, and click Upgrade.

Enter TFTP server, firmware and check which stations to upgrade

The upgrade procedure takes about 3 minutes. The process can be monitored by clicking the Log viewer tab in the TFTP server program.

Do not unplug devices during the upgrade!

If video is not working after having upgraded the Turbine Video Station TCIV-x to firmware version 4.11, see article TCIV - No video after upgrading to v. 4.11