Difference between revisions of "Upgrade from Pulse to IC-EDGE"
From Zenitel Wiki
(→Upgrade the Stations) |
(→Firmware versions) |
||
Line 3: | Line 3: | ||
== Firmware versions== | == Firmware versions== | ||
+ | whether a device is operating in Pulse mode or in Edge mode, depends on the firmware version on the device. | ||
'''Firmware for Pulse:'''<br> | '''Firmware for Pulse:'''<br> | ||
* In a Pulse system the [[:Category:Stations#Turbine stations|Turbine devices]] are running firmware 3.x or 4.x. | * In a Pulse system the [[:Category:Stations#Turbine stations|Turbine devices]] are running firmware 3.x or 4.x. |
Revision as of 13:56, 11 September 2019
This article describes how to upgrade from a Pulse system to an IC-EDGE System.
Firmware versions
whether a device is operating in Pulse mode or in Edge mode, depends on the firmware version on the device.
Firmware for Pulse:
- In a Pulse system the Turbine devices are running firmware 3.x or 4.x.
- In a Pulse system the INCA devices are running firmware 2.9 or earlier.
Firmware for IC-EDGE System:
- In an IC-EDGE system all Turbine devices are running firmware 5.x.
- In an IC-EDGE system all INCA devices are running firmware 2.10 or newer.
Prerequisites
- In an IC-EDGE System, INCA stations cannot be used as the Edge Controller. The Edge Controller must be a Turbine device. If the current Pulse Server is an INCA station, you must select a different device (Turbine) as the Edge Controller.
- TCIV video intercoms should not be used as the Edge Controller for systems exceeding 4 devices.
- VS-IMT can be used for station discovery and upgrade, but should not be used to configure Edge.
Licenses
Pulse licenses will be honored in an IC-EGDE System. When upgrading a Pulse Server to version 5.x, any licenses installed on the original Pulse Server will still be valid.
More information regarding licensing in Edge can be found here.
Upgrade the system
Upgrade all stations and devices with firmware for Edge.
- Download software for IC-EDGE System
- Upgrade procedure using the VS-IMT tool can be found here.
- Manual upgrade procedure can be found here.
Edge Configuration
Detailed information on how to configure Edge can be found here.