Actions

Difference between revisions of "SuperUser"

From Zenitel Wiki

Line 1: Line 1:
A '''SuperUser''' is a user with access to all features in the system. A SuperUser is assigned to [[Class of service]] 16. By default there is one SUperUser in an exchange. This is the station connected to [[physical number]] 1 ([[directory number]] 101). This station is also by default set to receive error messages generated by the system. The error reporting is configured from [[Exchange_%26_System_%28AlphaPro%29#Faults|Exchange & System -> RCI -> Faults]].
+
A '''SuperUser''' is a user with access to all features in the system. A SuperUser is assigned to [[Class of service]] 16. By default there is one SUperUser in an exchange. This is the station connected to [[physical number]] 1 ([[directory number]] 101). This station is also by default set to receive the following error messages generated by the system:
 +
* Line error (faulty station line)
 +
* Board error ([[AMC-IP]] cannot communicate with the board reported down)
 +
* Device error ([[RIO]] or slave [[module]] communication failure)
 +
* AGA error ([[AlphaNet]] or [[MultiModule]] audio line error)
 +
 
 +
The error reporting is configured from [[Exchange_%26_System_%28AlphaPro%29#Faults|Exchange & System -> RCI -> Faults]].

Revision as of 22:33, 1 September 2008

A SuperUser is a user with access to all features in the system. A SuperUser is assigned to Class of service 16. By default there is one SUperUser in an exchange. This is the station connected to physical number 1 (directory number 101). This station is also by default set to receive the following error messages generated by the system:

  • Line error (faulty station line)
  • Board error (AMC-IP cannot communicate with the board reported down)
  • Device error (RIO or slave module communication failure)
  • AGA error (AlphaNet or MultiModule audio line error)

The error reporting is configured from Exchange & System -> RCI -> Faults.