Difference between revisions of "Private mode"
From Zenitel Wiki
Line 10: | Line 10: | ||
Note: When using the feature ''programmable private/open'', the current state (private or open) is stored in [[state data]], thus will be removed during "chilly reset". | Note: When using the feature ''programmable private/open'', the current state (private or open) is stored in [[state data]], thus will be removed during "chilly reset". | ||
+ | |||
+ | |||
+ | === Related articles === | ||
+ | * [[Private break-in]] | ||
+ | * [[Override of absent or private feature]] | ||
+ | * [[Open / Private selection feature|Programable Open/Private]] | ||
+ | * [[Private Ringing mode (Event Type)]] | ||
+ | * [[Private Ringing Outgoing (Event Type)]] | ||
+ | * [[Increased volume on ringing signal]] | ||
+ | * [[Exchange_%26_System_(AlphaPro)#Calls_and_Options|Private ringing on Call Request]] ("Private ring mail priority") | ||
+ | * [[SIP phone: Forward unattended call]] | ||
[[Category: AlphaCom features]] | [[Category: AlphaCom features]] |
Revision as of 10:25, 28 February 2013
When calls are made to a station in Private mode, the station will be ringing like a telephone, and the called user has to accept the call by pressing the M-key or lift the handset.
Private mode can be set:
- By selecting "Private" mode on the station. Most station types has a switch or a jumper on the circuit board to set the station in Private mode. On IP stations one must press the C-button for 3 seconds.
- By enabling the Programable Open/Private in AlphaPro, then dial 7887 to set the station in Private mode.
- By setting the "Always Private" flag in AlphaPro
Note: When using the feature programmable private/open, the current state (private or open) is stored in state data, thus will be removed during "chilly reset".