Private mode

Test of station in Private

When calls are made to a station in Private mode, the station will be ringing like a telephone, and the called user has to accept the call by pressing the M-key or lift the handset.

Private mode can be set:

• By selecting "Private" mode on the station. Most station types has a switch or a jumper on the circuit board to set the station in Private mode. On IP stations one must press the C-button for 3 seconds.
• By enabling the Programable Open/Private in AlphaPro, then dial 7887 to set the station in Private mode.
• By setting the "Always Private" flag in AlphaPro

Note: When using the feature Programable Open/Private, the current state (private or open) is stored in state data, thus will be removed during "chilly reset".

Related articles

• Private break-in
• Override of absent or private feature
• Programable Open/Private
• Private Ringing mode (Event Type)
• Private Ringing Outgoing (Event Type)
• Increased volume on ringing signal
• Private ringing on Call Request ("Private ring mail priority")
• SIP phone: Forward unattended call