Private mode: Difference between revisions
From Zenitel Wiki
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
[[File:Private mode2.PNG|thumb|300px|right| | [[File:Private mode2.PNG|thumb|300px|right|State test (from 11.3.3.1) of station private/open mode ]] | ||
When calls are made to a station in '''Private mode''', the station will be ringing like a telephone, and the called user has to accept the call by pressing the [[M-key]] or lift the handset. | When calls are made to a station in '''Private mode''', the station will be ringing like a telephone, and the called user has to accept the call by pressing the [[M-key]] or lift the handset. | ||
| Line 21: | Line 21: | ||
* [[Exchange_%26_System_(AlphaPro)#Calls_and_Options|Private ringing on Call Request]] ("Private ring mail priority") | * [[Exchange_%26_System_(AlphaPro)#Calls_and_Options|Private ringing on Call Request]] ("Private ring mail priority") | ||
* [[SIP phone: Forward unattended call]] | * [[SIP phone: Forward unattended call]] | ||
[[File:Private mode.PNG|thumb|300px|right|State test (from 11.2.x.x) of station private/open mode]] | |||
[[Category: AlphaCom features]] | [[Category: AlphaCom features]] | ||
Revision as of 15:09, 25 October 2013
When calls are made to a station in Private mode, the station will be ringing like a telephone, and the called user has to accept the call by pressing the M-key or lift the handset.
Private mode can be set:
- By selecting "Private" mode on the station. Most station types has a switch or a jumper on the circuit board to set the station in Private mode. On IP stations one must press the C-button for 3 seconds.
- By enabling the Programable Open/Private in AlphaPro, then dial 7887 to set the station in Private mode.
- By setting the "Always Private" flag in AlphaPro
Note: When using the feature Programable Open/Private, the current state (private or open) is stored in state data, thus will be removed during "chilly reset".
