Licensing in IC-EDGE

Some Pulse features require a software license key. The license key is linked to the MAC address of the Pulse Server.

This article describes the "Generation 3" licening, supported by Turbine stations ver. 4.7 and higher. For licenseing in previous versions of Turbine software, and for the INCA Station platform, see Pulse Licensing - Generation 1 and 2.

Available licenses

The following licenses are available:

License	Item Number	Comments
Intercom Extension	100 9661 001	License for additional Vingtor-Stentofon devices beyond 32. One license per device. Note that the first 32 devices do not require any license
SIP Client Extension	100 9661 201	License for 3rd party SIP telephone. One license per phone
TelTrunk	100 9662 001	License for GSM telephone gateway and Analog telephone gateway. One license per gateway

To insert a license:

Obtain the license key from your local supplier
Log on to the Edge Controller
Select Edge Controller > Licensing
In the New License field enter a valid license code, then Activate License

License for 4 SIP devices installed

From factory there is a 60-day free license period during which all devices can be used without the need of any license.
When the free license period expires there must be a valid license installed, if not the licensed device will cease to operate

The IC-EDGE System comes with a 60-day Grace period where all the functions can be tested without the need to purchase any license.