Starting Up Turbine Station
From Zenitel Wiki
The Zenitel IP devices feature an embedded web interface, which allows users to log in using a standard web browser.
To access the IP device, your PC and the device have to be connected to a PoE switch using network cables:
- Connect the PC to a port on the network switch
- Connect the deviceto a PoE port on the network switch
When the IP device is connected to the network, the IP address of the device is automatically obtained in one of two ways:
- An IP address is automatically obtained from a DHCP server if a DHCP server is present on the network.
- If there is no DHCP server, a random IP address in the range 169.254.x.x will be assigned.
|
The INCA series of devices have a default static IP address 169.254.1.100. |
How to find the IP Address of a device
If the device is not registered to a server, it will speak its own IP address when you press the Call button, a Digit key a DAK key or activate an Input.
During commissioning, the device must be set to operate in the required mode. There are three modes of operation:
- ICX-AlphaCom mode - the device will register to an ICX-AlphaCom or AlphaCom XE server
- SIP mode - the device will register to a SIP server
- Edge mode - the device will register to an Edge server
The default mode from factory is "Edge" mode.
As an alternative you can use the PC application IMT (Intercom Management Tool). Start IMT, select Discover & Upgrade from main menu, and enter IP address range to scan.
As soon as you know the IP address, you can log into the device.