Actions

Message Formats (Sortable)

From Zenitel Wiki

Revision as of 11:35, 25 June 2007 by 10.5.101.115 (talk)
Message Short format Message id, Hex Description
ABSENCE_STATUS   0x002A Response to SET_ABSENCE and GET_ABSENCE messages
ALARM_MSG $ALRM 0x0007 Set up (or disconnect) an ASVP Alarm message to a single station or a predefined group of stations
ALARM_MSG_ACK   0x0009 Positive response to ALARM_MSG
AUDIO_CH_DISCON   0x8012 Disconnect a audio channel after loopback test
AUDIO_CH_FAULTY   0x8013 Response to AUDIO_CH_LOOPBACK_REQ: Requested channel was faulty
AUDIO_CH_LOOPBACK_ACK   0x8011 Positive acknowledge of AUDIO_CH_LOOPBACK_REQ
AUDIO_CH_LOOPBACK_REQ $ALRM 0x8010 Request for loopback audio connection. Used by the Audio Channel Testing process
AUDIO_CH_TONE_REQ   0x8015 Request a peer exchange to put a 500Hz tone on a audio channel
AUDIO_DETECT $VOX 0x0053 Triggers the event Simplex_Conference_Audio
AUDIO_LINK_NOT_AVAILABLE   0x8006 Response to AUDIO_PATH_SETUP from next node: Channel not granted
AUDIO_LINK_OK   0x8003 Response to AUDIO_PATH_SETUP. Channel number is OK
AUDIO_LINK_RELEASE   0x8005 Used to release audio path backwards stepwise from node to node when setup meets busy or faulty link
AUDIO_M_FEED_REQ   0x801A Global Simplex Conference: Some station is pressing the M-key when participating in a conference
AUDIO_M_FEED_STOP   0x801B Global Simplex Conference: The station is releasing the M-key
AUDIO_M_LINK_OK   0x8019 Per­ hop positive response to AUDIO_M_PATH_SETUP
AUDIO_M_PATH_BACKTRACK   0x8018 AUDIO_M_PATH_SETUP failed
AUDIO_M_PATH_OK   0x8017 Contains statuses for an AUDIO_M_PATH_SETUP from one or more destination exchanges
AUDIO_M_PATH_SETUP   0x8016 Communication in a multi-node network
AUDIO_PATH_CHECK_OK   0x800F Positive response to CHECK_AUDIO_PATH
AUDIO_PATH_DELAY   0x8007 Set Duplex switch delay
AUDIO_PATH_DISCONNECT   0x8006 Release the end­to­end audio path. Normal disconnect from source or destination
AUDIO_PATH_OK   0x8002 End to end message: Audio path is ready
AUDIO_PATH_SETUP   0x8001 Set up audio path between a source node and a destination node (possibly via transit nodes)
BUILD_GLOB_GRP   0x0070 Broadcast message to all exchanges to make them rebuild global group indexes
C_KEY $C 0x0058 Order station to press C-key
CALL_SETUP $CALL 0x0008 Sets up a coversation between two users
CALL_STATUS_BC   0x0040 Broadcast message telling the status of a call
CALL_TRANSFER $TRF 0x0044 Set or remove call transfer for a station
CALL_TRANSFER_NOK   0x0046 Negative response to CALL_TRANSFER
CALL_TRANSFER_OK   0x0045 Positive response to CALL_TRANSFER
CANCEL_MAIL $CANM 0x0065 Delete one or more mail/call request/alarm messages queued at a station
CHECK_AUDIO_PATH   0x800E Check of established audio path at regular intervals
CLEAR_RCO $CLR 0x0015 Turn the given remote control output off
CLEAR_RCO_FAILED   0x0017 Negative response to the CLEAR_RCO message
PULSE_RCO_OK   0x001C Positive response to the PULSE_RCO message
COMMAND_RESPONSE   0x0066 General response message to messages
CONF_TALK $CONF_TALK 0x008B Set Simplex conference speaker
CONF_TALK_STOP $CONF_TALK_STOP 0x008C Stop station form feeding Simplex conference
PROG_CONF $CONF 0x0004 Set Simplex conference for predefined group of stations or a single station
CONF_IS_ROOT   0x007B Broadcast message. Sender informs that it is root of conference
CONF_JOIN   0x0078 Exchange wants to join conference, asks root-exchange to setup connection back to sender
CONF_MEMB_CHK   0x0079 Ask whether any neighbor exchange has any ordinary member left in conference
CONF_NOT_ROOT   0x007C Broadcast message. Sender informs that it is no longer root of conference
CONF_ORD_MEMB   0x007A An exchange tells its neighbors that it has ordinary member left in conference
CONF_TALK $CONF_TALK 0x008B Set Simplex conference speaker
CONF_TALK_STOP $CONF_TALK_STOP 0x008C Stop station form feeding Simplex conference
CONN_REQUEST $CONN 0x000A Sets up a coversation between two users
CONN_REF_ACK   0x000E The external application acknowledges the CONN_REFERENCE
CONN_REFERENCE   0x000B Positive response from the exchange to CONN_REQUEST
CONN_STATUS_BC   0x0041 Broadcast message telling that a connection is established
CONSOLE_DISC   0x007E Log off from system debug console (TST)
CONSOLE_REQ   0x007E Log on to system debug console (TST)
COPY_MAIL $CPYM 0x0083 Send a copy of a mail in own queue to a new destination (station or group)
DIAL_DIGITS $DD 0x0050 Simulate digit dialing from a station
DELETE_MAIL $DELM 0x0034 Delete a mail entry in the queue for an intercom station
AUDIO_M_FEED_REQ   0x801A Global Simplex Conference: Some station is pressing the M-key when participating in a conference
AUDIO_LINK_OK   0x8003 Response to AUDIO_PATH_SETUP. Channel number is OK
AUDIO_M_FEED_REQ   0x801A Global Simplex Conference: Some station is pressing the M-key when participating in a conference
AUDIO_M_FEED_REQ   0x801A Global Simplex Conference: Some station is pressing the M-key when participating in a conference
AUDIO_LINK_OK   0x8003 Response to AUDIO_PATH_SETUP. Channel number is OK
AUDIO_M_FEED_REQ   0x801A Global Simplex Conference: Some station is pressing the M-key when participating in a conference
AUDIO_M_FEED_REQ   0x801A Global Simplex Conference: Some station is pressing the M-key when participating in a conference
AUDIO_LINK_OK   0x8003 Response to AUDIO_PATH_SETUP. Channel number is OK
AUDIO_M_FEED_REQ   0x801A Global Simplex Conference: Some station is pressing the M-key when participating in a conference
AUDIO_M_FEED_REQ   0x801A Global Simplex Conference: Some station is pressing the M-key when participating in a conference
AUDIO_LINK_OK   0x8003 Response to AUDIO_PATH_SETUP. Channel number is OK
AUDIO_M_FEED_REQ   0x801A Global Simplex Conference: Some station is pressing the M-key when participating in a conference
AUDIO_M_FEED_REQ   0x801A Global Simplex Conference: Some station is pressing the M-key when participating in a conference
AUDIO_LINK_OK   0x8003 Response to AUDIO_PATH_SETUP. Channel number is OK
AUDIO_M_FEED_REQ   0x801A Global Simplex Conference: Some station is pressing the M-key when participating in a conference
AUDIO_M_FEED_REQ   0x801A Global Simplex Conference: Some station is pressing the M-key when participating in a conference
AUDIO_LINK_OK   0x8003 Response to AUDIO_PATH_SETUP. Channel number is OK
AUDIO_M_FEED_REQ   0x801A Global Simplex Conference: Some station is pressing the M-key when participating in a conference
AUDIO_M_FEED_REQ   0x801A Global Simplex Conference: Some station is pressing the M-key when participating in a conference
AUDIO_LINK_OK   0x8003 Response to AUDIO_PATH_SETUP. Channel number is OK
AUDIO_M_FEED_REQ   0x801A Global Simplex Conference: Some station is pressing the M-key when participating in a conference
AUDIO_M_FEED_REQ   0x801A Global Simplex Conference: Some station is pressing the M-key when participating in a conference
AUDIO_LINK_OK   0x8003 Response to AUDIO_PATH_SETUP. Channel number is OK
AUDIO_M_FEED_REQ   0x801A Global Simplex Conference: Some station is pressing the M-key when participating in a conference
AUDIO_M_FEED_REQ   0x801A Global Simplex Conference: Some station is pressing the M-key when participating in a conference
AUDIO_LINK_OK   0x8003 Response to AUDIO_PATH_SETUP. Channel number is OK
AUDIO_M_FEED_REQ   0x801A Global Simplex Conference: Some station is pressing the M-key when participating in a conference
AUDIO_M_FEED_REQ   0x801A Global Simplex Conference: Some station is pressing the M-key when participating in a conference
AUDIO_LINK_OK   0x8003 Response to AUDIO_PATH_SETUP. Channel number is OK
AUDIO_M_FEED_REQ   0x801A Global Simplex Conference: Some station is pressing the M-key when participating in a conference
AUDIO_M_FEED_REQ   0x801A Global Simplex Conference: Some station is pressing the M-key when participating in a conference
AUDIO_LINK_OK   0x8003 Response to AUDIO_PATH_SETUP. Channel number is OK