Manually Added Devices (Edge)
From Zenitel Wiki
|
This article is under construction! |
The following devices are not automatically discovered by the Edge Controller, and must be manually added to the IC-EDGE System:
| Device | Device type | Comments |
| Intercom Extension | Vingtor-Stentofon Device | The following devices are not automatically discovered, and must be manually added to the system |
| ITSV-1 phone | Vingtor-Stentofon Device | License for 3rd party SIP telephone. One license per phone |
| SIP devices | 3rd party SIP | License for GSM telephone gateway and Analog telephone gateway. One license per gateway |
| SIP Telephone gateways | Gateway | License for GSM telephone gateway and Analog telephone gateway. One license per gateway |
- Vingtor-Stentofon Device
- Turbine or INCA Stations on a different subnet than the Edge Controller
- The ITSV-1 phone
- Vingtor-Stentofon Client - Windowsbased softclient for Edge
- 3rd party SIP - 3rd party SIP devices
- Gateway - SIP Telephone gateways for GSM network or fixed PSTN line
When you add a new device, it will automatically be assigned a number and name, which can be modified as required.
- From Edge Controller > System Configuration > Directory, under the Manually Added Devices section, press the "+" button
- Select from the dropdown list the type of device you want to add
- Modify Number and Name as required
- Optionally one can add a SIP Password. If a password is entered, one have to also manually configure the same password in the device it self. The password is used for the registration proccess.
- Press Save to store the new device in the Edge Controller
|
Manually Added Devices must be configured by logging on to the device it self and do the neccessary settings |