APC - AlphaCom Program & Clock Board

Highlights

• System master clock
• Circuitry for 6 audio program feed channels with adjustable sensitivity (gain)
• 6 alarm inputs
• Fan control
• Power connector (6-pin socket source) for hot plug-in cable
• Reset button in front

Installation

The APC board is used in the AlphaCom XE20 and XE26 servers. The board plugs into board position 26

Turn power off before inserting or removing the APC board

APC board, connection and adjustment

The APC board has in front:

• An RJ11 plug used for hot plug-in of other feature boards
• A reset button. When pressed, the server will reboot. No configuration will be lost, but any active calls will be terminated.
• 6 potensiometers for adjuting the input level

APC Connection Kit - 1009503000

The APC Connection Kit is required to access the 6 remote control inputs and 6 audio program inputs of the APC. The kit consists of APC filter card and APC connection board.

Related Articles

• APC Connection Kit - 1009503000
• RCI - Remote Contol Input
• Audio Program
• Additional Documentation on Zenitel.com