TCIA-2

THIS PAGE IS UNDER CONSTRUCTION

The TCIA-2 is an IP based intercom with an analog frontboard intended for areas where exposure of the physical network is unwanted.

Analog over IP Intercom
(100 8113 020)

Getting started

• Connecting your Turbine Intercom station
• Starting up

Connecting the TKIA-2 and TKIS-2

The 8-wire cable provided is used for connecting the TKIA-2 Gateway to the TKIS-2 Intercom. The colorcoded wires serve as a visual aid to connecting to the correct pins at both ends.

Using the 8-wire cable, connect the pins on the TKIA-2 to the corresponding pins on the TKIS-2 according to the drawing.

Configuration

The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.

• AlphaCom mode
• SIP mode
• Pulse mode

Restore Factory Defaults and Software Upgrade

• Restore Factory Defaults
• Upgrade via the station web interface
• Upgrade using the IMT tool
• Automatic Software Upgrade (SIP mode only)

Connectors, Indicators and Dimensions

• Board Connections
• Station Indication LEDs
• Dimensions

Accessories

• TA-1, Turbine Compact Onwall Box - 1008140010
• TA-2, US 2 GANG, Double Depth - 3.5”, Back Box, Masonry - 1008140020
• TA-5, Bracket for US 2 GANG Back Box - 1008140050
• TA-14 Microphone Windscreen - 1008140140