Release info

This document provides the release notes for VSF-Turbine 5.1 with incremental bug fix releases. The release notes for VSF-Turbine 5.1 describe improvements and bugfixes after VSF-Turbine 4.11.3.1. The new features releated to IC-EDGE is described based on IC-EDGE 5.0.

Name: VSF-Turbine
Description: VSF-Turbine is a firmware archive for all Turbine Family Intercom stations including devices: TCIS-x, TCIV-x, TKIS-2, TMIS-x, TFIE-x, TKIE-x, TFIX-x, IP-LCM, ECPIR-3P, Exigo IP speakers. Exigo Network Amplifiers (only SIP mode and ICX- AlphaCom mode), and ENA-2060DC1 (only in SIP mode) The firmware is delivered in a ZIP archive:.
Version:

vsft-5.1.x.x - Used for standard in-field upgrades

Date: 14.02.2020
Status: Limited Availability
VS-IS 5.0 is a limited availability release. GA releases are VS-IS 4.11 and VS-IS 5.1
Compatibility: Pulse to IC-EDGE System
You can upgrade from Pulse (VS-IS 4.x) to IC-EDGE, but the whole system needs to run with the same Turbine software (VS-IS 5.1).
In an IC-EDGE System, INCA intercoms cannot be used as the Edge Controller.
TCIV video intercoms should not be used as the Edge Controller for systems exceeding 4 devices.
IMT 1.5 can be used for station discovery and upgrade but must not be used to configure IC-EDGE.
Pulse to IC-EDGE Licenses
Pulse licenses will be honored in an IC-EGDE System. This means that when you upgrade firmware from VS-IS 4.x to 5.x your Pulse licenses will work for IC-EDGE.

The number of free VS station licenses has been increased from 16 to 32 in IC-EDGE. This means that you get an additional 16 VS stations to connect to in IC-EDGE

Both Multisite Trunking and VS-Client are free of charge in IC-EDGE

VSF-TURBINE 5.1.3.0

New Features - Turbine Intercom

PHIX-139 Mobile App

PHIX-141 Implemented support for IPv6

PHIX-142 External communication - Suppport telephony calls in Edge Controller

PHIX-299 ENA in SIP mode

Improvements

PHIX-275 Verifying SIP TLS certificate

PHIX-231 Relay operation in offline state (ICX-AlphaCom mode)

PHIX-184 Test and document ENA in SIP

PHIX-129 Edge offline help

PHIX-120 Edge/SIP simple mode

PHIX-119 Edge controller - Audio messaging support

MTN-2684 Added basic support for SNMP v3 on Turbine

MTN-2623 Pulse support for MP114 speech start/end signalling (handle call disconnect)

MTN-2460 Common CA certificates should be bundled with stations so simplify certificate handling

MTN-2298 IP-LCM: Update SIP relay programming list to use correct names

MTN-1978 Pulse: Sequencial phone calls are not possible

MTN-1380 Include sw verison number in SIP header

PHIX-293 Update default value for RTP timeout to 20s for amplifiers

MTN-2691 Changed continous line monitoring from 60 min to 2 min for ENA2060

Fixed issues

MTN-2657 RTP Firewall range of Turbine and INCA

MTN-2641 Pulse: one-way audio to SIP client ClearCom

MTN-2530 Not possible to disable that C-key in idle toggles Private/Open in Pulse/SIP

MTN-2463 "File Then Tone" setting in Pulse Messaging no working correctly in 4.11

MTN-2444 ONVIF not reporting proper model for TCIV-5

MTN-2435 Group call chime in Pulse is cut off at the end

MTN-2074 TKIE-3: Keyboard matrix: Volume UP/DOWN is not working

MTN-1301 Pulse: Busy Override fails when called party is off-hook

MTN-2692 Turbine stations cannot register to ICX/AlphaCom due to dash sign in directory number field

MTN-2686 Output not working for amplifiers in SIP mode

MTN-2363 Factory reset does not delete uploaded script

MTN-2362 Dual Stream: RTSP H264 - Artifacts at the bottom

MTN-2361 Video artifacts with TCIV H264 and Honeywell Maxpro NVR

MTN-2360 SIP: Client side forwarding (INCA, Turbine) does not work

MTN-2359 Pelco - long wait for the stream

MTN-2358 High group call priority - issues with ringing signals

MTN-2356 TCIV under load - SNMP not working

MTN-2339 Group call - no chime on Grandstream

MTN-2220 SNMP after downgrade - 4.11 -> 4.9

MTN-1073 Group calls fails if system previously configured with ZAP

Turbine 5.1 - Release notes

From Zenitel Wiki

Contents