Door opening
From Zenitel Wiki
Door opening is a feature triggered by pressing digit 6 during conversation with the door station. When pressing the digit, a RCO is triggered for 3,5 seconds (programmable from AlphaPro, Exchange & System -> Systems -> Timers -> RCO Pulse (Door Open) Time). The RCO output operates a relay on a MRBD relay board or the relay of the IP substation, to which the door magnet is connected.
Related Articles:
- Door Opening - Configuration example
- Door Opening - During Conversation (Event Type)
- Door Opening - Automatick Lock (Event Type)
- Door Opening using Dummy Number (Event Handler)
- Door Opening through AudioCodes
- Door Opening through SIP Trunk
- Map RCO to IP Station
- Turbine I/O Settings
- Door opening of Ring Master stations from AlphaCom
- AlphaCom/M100 Integration - Door Opening