Difference between revisions of "APC - AlphaCom Program & Clock Board"
From Zenitel Wiki
| Line 18: | Line 18: | ||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
| + | <br> | ||
| + | |||
| + | ===Installation=== | ||
| + | * [[AlphaCom XE20]] and [[AlphaCom XE26|XE26 exchanges]]: The board plugs into board position 25 | ||
| + | * [[AlphaCom XE7]] exchange: The board plugs into board position 7. | ||
| + | |||
| + | {{obs| | ||
| + | * ''Turn '''power off''' before inserting or removing the AMC-IP board'' }} | ||
| + | |||
| + | [[Image:AMC-IP Installation.PNG|left|thumb|500px|AMC-IP card installation]] | ||
| + | <br style="clear:both;" /> | ||
| + | |||
| + | <br> | ||
| + | |||
| + | ===Filter Board=== | ||
| + | In the [[AlphaCom XE20]] and [[AlphaCom XE26|XE26 exchanges]] a [[Filter card AMC-IP|filter and connection board]] must be inserted from the rear side of the cabinet in the same card position as the AMC-IP card. | ||
| + | |||
| + | <br> | ||
==Related Articles== | ==Related Articles== | ||
* [[APC Connection Kit - 1009503000]] | * [[APC Connection Kit - 1009503000]] | ||
Revision as of 15:04, 31 August 2018
Highlights
- System master clock (two-phase - 16.384 Mhz) and module reset
- Circuitry for 6 audio program feed channels
- Can be fed by any analog source
- Galvanic isolated input via 600 ohm transformer to avoid noise problems
- Adjustable sensitivity (gain)
- 6 alarm inputs
- 2 internal alarms
- Fan control
- Coded connector to ensure correct positioning in the module
- Power connector (6-pin socket source) for hot plug-in cable
- Reset button in front
Installation
- AlphaCom XE20 and XE26 exchanges: The board plugs into board position 25
- AlphaCom XE7 exchange: The board plugs into board position 7.
|
|
Filter Board
In the AlphaCom XE20 and XE26 exchanges a filter and connection board must be inserted from the rear side of the cabinet in the same card position as the AMC-IP card.