Difference between revisions of "APC - AlphaCom Program & Clock Board"
From Zenitel Wiki
(→Filter Board) |
|||
| Line 17: | Line 17: | ||
<br> | <br> | ||
| − | + | ==Installation== | |
The APC board is used in the [[AlphaCom XE20]] and [[AlphaCom XE26|XE26 servers]]. The board plugs into board position 26 | The APC board is used in the [[AlphaCom XE20]] and [[AlphaCom XE26|XE26 servers]]. The board plugs into board position 26 | ||
| Line 28: | Line 28: | ||
<br> | <br> | ||
| − | + | == APC Connection Kit - 1009503000 == | |
The APC Connection Kit consists of APC filter card and APC connection board. This kit is required to access the '''6 remote control input'''s and '''6 audio program inputs''' of the APC | The APC Connection Kit consists of APC filter card and APC connection board. This kit is required to access the '''6 remote control input'''s and '''6 audio program inputs''' of the APC | ||
Revision as of 15:10, 31 August 2018
Highlights
- System master clock (two-phase - 16.384 Mhz) and module reset
- Circuitry for 6 audio program feed channels
- Can be fed by any analog source
- Galvanic isolated input via 600 ohm transformer to avoid noise problems
- Adjustable sensitivity (gain)
- 6 alarm inputs
- 2 internal alarms
- Fan control
- Coded connector to ensure correct positioning in the module
- Power connector (6-pin socket source) for hot plug-in cable
- Reset button in front
Installation
The APC board is used in the AlphaCom XE20 and XE26 servers. The board plugs into board position 26
|
|
APC Connection Kit - 1009503000
The APC Connection Kit consists of APC filter card and APC connection board. This kit is required to access the 6 remote control inputs and 6 audio program inputs of the APC