APC - AlphaCom Program & Clock Board

Highlights

• System master clock (two-phase - 16.384 Mhz) and module reset
• Circuitry for 6 audio program feed channels
• Can be fed by any analog source
• Galvanic isolated input via 600 ohm transformer to avoid noise problems
• Adjustable sensitivity (gain)
• 6 alarm inputs
• 2 internal alarms
• Fan control
• Coded connector to ensure correct positioning in the module
• Power connector (6-pin socket source) for hot plug-in cable
• Reset button in front

Installation

The APC board is used in the AlphaCom XE20 and XE26 servers. The board plugs into board position 26

Turn power off before inserting or removing the APC board

APC board, connection and adjustment

APC Connection Kit - 1009503000

The APC Connection Kit consists of APC filter card and APC connection board. This kit is required to access the 6 remote control inputs and 6 audio program inputs of the APC

Related Articles

• APC Connection Kit - 1009503000
• RCI - Remote Contol Input
• Audio Program
• Additional Documentation on Zenitel.com