Difference between revisions of "Configure 3rd party SIP devices (Edge)"
From Zenitel Wiki
| Line 7: | Line 7: | ||
{{note| | {{note| | ||
* ''From factory there is a '''60-day free license period''' during which SIP devices can be used without the need of any license.'' | * ''From factory there is a '''60-day free license period''' during which SIP devices can be used without the need of any license.'' | ||
| − | * ''When the free license period expires there must be a valid license installed, if not the '''SIP device will cease operating'''''}} | + | * ''When the free license period expires there must be a valid license installed, if not the '''SIP device will cease operating''''' }} |
== Create a SIP Account == | == Create a SIP Account == | ||
Revision as of 15:35, 21 March 2019
Up to 10 third party SIP devices, such as SIP phones, SIP Speakers, Soft Phones etc., can be registered to an IC-EDGE System. Each SIP device requires that a SIP User account is defined on the Edge Controller.
Licences
Before adding SIP accounts to the system, you need to install a license for the Pulse 3rd Party SIP phones. When a valid SIP phone license has been installed, the Third Party SIP Terminals parameter will be available.
|
|
Create a SIP Account
- Log on to the Pulse Server.
- Select Server Management > Server Configuration > Directory Settings.
- Under Third Party SIP Terminals enter the Directory Number, Name, and Profile for the SIP telephone.
- Click Add followed by Save
The Password field can be left blank. When a password is entered, the SIP phone must register using this password.
Configuration of the SIP device
You now have to log into the 3rd-party SIP telephone to configure the SIP account to register it with the Pulse Server station. The Directory Number and Password (SIP Account) created in the section above is used to register the 3rd-party station with the Pulse Server.