Difference between revisions of "Door opening"
From Zenitel Wiki
| Line 9: | Line 9: | ||
* [[Configuration_guide_for_AudioCodes_MP114/118,_v6.2_and_higher#Door_Opening_Feature|Door Opening through AudioCodes]] | * [[Configuration_guide_for_AudioCodes_MP114/118,_v6.2_and_higher#Door_Opening_Feature|Door Opening through AudioCodes]] | ||
* [[SIP_trunk_node_-_configuration#Door_Opening_Feature|Door Opening through SIP Trunk]] | * [[SIP_trunk_node_-_configuration#Door_Opening_Feature|Door Opening through SIP Trunk]] | ||
| + | * [[IP_Station_Configuration#RCO_-_Remote_Control_Output|Map RCO to IP Station]] | ||
| + | * [[TCIS_Configuration#I.2FO_Settings|Turbine I/O Settings]] | ||
[[Category: AlphaCom features]] | [[Category: AlphaCom features]] | ||
Revision as of 11:10, 18 December 2013
Door opening is a feature triggered by pressing digit 6 during conversation with the door station. When pressing the digit, a RCO is triggered for 3,5 seconds (programmable from AlphaPro, Exchange & System -> Systems -> Timers -> RCO Pulse (Door Open) Time). The RCO output operates a relay on a MRBD relay board or the relay of the IP substation, to which the door magnet is connected.
Related Articles:
- Door Opening - During Conversation (Event Type)
- Door Opening - Automatick Lock (Event Type)
- Door Opening using Dummy Number (Event Handler)
- Door opening of Ring Master stations from AlphaCom
- AlphaCom/M100 Integration - Door Opening
- Door Opening through AudioCodes
- Door Opening through SIP Trunk
- Map RCO to IP Station
- Turbine I/O Settings