Difference between revisions of "Filter and connection card ASLT and ATLB"
From Zenitel Wiki
| Line 1: | Line 1: | ||
[[Image:1009501041.jpg|right|thumb|100px|1009501041 filter and connection card]] | [[Image:1009501041.jpg|right|thumb|100px|1009501041 filter and connection card]] | ||
| − | The 1009501041 is a combined filter and connection card for use with ASLT and ATLB cards inside [[AlphaCom E20]] and [[AlphaCom E26]] exchanges. The top | + | The 1009501041 is a combined filter and connection card for use with ASLT and ATLB cards inside [[AlphaCom E20]] and [[AlphaCom E26]] exchanges. The top six RJ45 connectors on the card match directly with STENTOFON station cables EPKAB98510 and EPKAB98515. [[RCO|RCO’s]] are available on the 7th RJ45 connector. |
By using this filter/connection card it is possible to terminate CAT5 installation cables directly inside the exchange without using additional patchframes. | By using this filter/connection card it is possible to terminate CAT5 installation cables directly inside the exchange without using additional patchframes. | ||
Revision as of 21:16, 2 April 2008
The 1009501041 is a combined filter and connection card for use with ASLT and ATLB cards inside AlphaCom E20 and AlphaCom E26 exchanges. The top six RJ45 connectors on the card match directly with STENTOFON station cables EPKAB98510 and EPKAB98515. RCO’s are available on the 7th RJ45 connector.
By using this filter/connection card it is possible to terminate CAT5 installation cables directly inside the exchange without using additional patchframes.
Dipswitches
The card features a dipswitch package. When the dipswitches are in the downward position, the filter/connection card matches with an ASLT card, in the upward position it matches with an ATLB card. This information is also available in silkscreen print on the card itself. Note that the ATLB12 card which is also mentioned in the silkscreen print is not available.
Pinout
