Difference between revisions of "IP Desktop Station with Video Display - 1408001635"
From Zenitel Wiki
(→Configuration) |
|||
Line 9: | Line 9: | ||
General configuration. | General configuration. | ||
* [[IP Station Configuration - AlphaCom mode]] | * [[IP Station Configuration - AlphaCom mode]] | ||
− | * [[IP Station Configuration - SIP mode]] | + | * [[SIP Intercom Configuration|IP Station Configuration - SIP mode]] |
* [[IP Station Configuration - Pulse mode]] | * [[IP Station Configuration - Pulse mode]] | ||
Station specific configuration for the IP Desktop Station with Video Display: | Station specific configuration for the IP Desktop Station with Video Display: | ||
* [[IP Desktop - Video Module Configuration]] | * [[IP Desktop - Video Module Configuration]] | ||
− | |||
− | |||
− | |||
− | |||
== Restore Factory Defaults and Software Upgrade == | == Restore Factory Defaults and Software Upgrade == |
Revision as of 16:21, 19 July 2017
Contents
Getting Started
Configuration
The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.
General configuration.
- IP Station Configuration - AlphaCom mode
- IP Station Configuration - SIP mode
- IP Station Configuration - Pulse mode
Station specific configuration for the IP Desktop Station with Video Display:
Restore Factory Defaults and Software Upgrade
- Reset the intercom station to factory default settings
- Reset the Video Module to factory default settings
- Software Upgrade
- Software Upgrade of the Video Module
- Automatic Software Upgrade (SIP mode only)