Difference between revisions of "IP Heavy Duty Station V2"
From Zenitel Wiki
(→Configuration) |
|||
| Line 9: | Line 9: | ||
General configuration: | General configuration: | ||
* [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] | * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] | ||
| − | * [[Adding station to existing system (Edge)| | + | * [[Adding station to existing system (Edge)|Edge mode]] |
| − | * [[SIP Intercom | + | * [[SIP Intercom - Web Interface|SIP mode]] |
| + | |||
Station specific configuration for the IP Heavy Duty station: | Station specific configuration for the IP Heavy Duty station: | ||
Revision as of 14:48, 30 June 2022
Contents
Connections
Configuration
The station can operate in different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.
General configuration:
Station specific configuration for the IP Heavy Duty station:
Restore Factory Defaults and Software Upgrade
- Restore Factory Defaults
- Upgrade via the station web interface
- Upgrade using the IMT tool
- Automatic Software Upgrade (SIP mode only)
- Software Release Notes
Connectors, Indicators and Dimensions
Software Requirements
This station is fully supported as from AlphaCom version 11.2.3.11