Difference between revisions of "IP Master Station Kit - 1008093000"

Latest revision as of 11:43, 21 November 2023

IP Master Station Kit

Connections

Intercom connections

Configuration

The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.

Restore Factory Defaults and Software Upgrade

Connectors, Indicators and Dimensions

Software Requirements

This station is fully supported as form AlphaCom version 10.50

Additional Information

Additional Documentation on Zenitel.com

@@ Line 1: / Line 1: @@
-[[Image:IP MASTER STATION KIT.jpg|thumb|250px]]
+{{AEIPS}}
+[[Image:IP Master Station Kit.PNG|thumb|250px|IP Master Station Kit]]
+== Connections ==
+* [[IP Flush Connections|Intercom connections]]
-==Features==
+==Configuration==
-* Made for STENTOFON Critical Communication over IP (CCoIP)
+The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.
-* Supports full keyboard including direct access keys (DAK) and dynamic keys
+* [[IP Station Configuration - ICX-AlphaCom mode]]
-* Supports handset and headset
+* [[Adding station to existing system (Edge)|IP Station Configuration - Edge mode]]
-* Superb audio quality
+* [[SIP Intercom - Web Interface|IP Station Configuration - SIP mode]]
-* 0dB (600 Ohm) output to Public Address
+* [[IP Station Configuration - Pulse mode]]
-* Relay output for e.g. door lock control and tamper alarm input
-* Dual Ethernet ports for connection of other IP devices
-* Remote software upgrade, configuration and monitoring
+== Restore Factory Defaults and Software Upgrade ==
+* [[INCA Station Kit Restore Factory Defaults|Reset to factory settings]]
+* [[INCA Station Software upgrade|Upgrade via the station web interface]]
+* [[IMT - Discover & Upgrade|Upgrade using the IMT tool]]
+* [[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
+* [[:Category:INCA Release notes|Software Release Notes]]
-===Station Board Description===
+== Connectors, Indicators and Dimensions ==
-The IP Master Station Kit 100 8093 000 is delivered as a kit including board 8023, microphone and 2 x 6-pin plug-on screw terminals for local manufacturing of IP-CCoIP stations.
+*[[INCA Master Station Kit Board Connectors|Board Connectors]]
-The board is also used in STENTOFON standard IP flush mount master stations.
+* [[INCA Masterstation PCB LED Indicators|PCB LED Indications]]
+*[[IP Master Station Kit Dimensions & Mounting Instructions|Dimensions]]
+==Related Articles==
+* [[IP Flush Master Gooseneck]]
+* [[IP Flush Master Handset]]
+* [[IP SubStations, Acoustical design]]
-===Connections===
+== Software Requirements ==
+This station is fully supported as form AlphaCom version 10.50
-[[Image:IP_MASTER_STATION_KIT2.jpg|thump|250px]]
+==Additional Information ==
+* [http://www.zenitel.com/product/ip-master-station-kit Additional Documentation on Zenitel.com]
-===Station Board Connectors===
-{| border="0"
-|-
-|width="70pt"|&nbsp;
-|width="70pt"|&nbsp;
-|width="500pt"|&nbsp;
-|width="120pt"|&nbsp;
-|-
-|'''P1'''||colspan="2" | RJ45 LAN connector for 10/100 Mbit Ethernet connection.||rowspan="5"|[[Image:P1,P2.jpg|align="right" |thumb|100px|P1, P2]]
-|-
-|colspan="3"| The station can be powered from this connection if the line supports Power over Ethernet (PoE).<br>
-The connector has two LEDs in front where the right (R) indicates Ethernet speed and the left (L) verifies Ethernet link and traffic. (L and R seen from the connector side).
-|-
-|&nbsp;||&nbsp;||&nbsp;
-|-
-|'''P2'''||colspan="2" | RJ45 connector for auxiliary equipment like IP camera, PC or a second IP station.||
-|-
-|colspan="3"|This port has not an individual IP address. It does not carry power for AUX equipment.
-|-
-|'''P3'''||colspan="2"|6-pin plug-on screw terminal for external connections.||rowspan="4" |[[Image:IPmatrP3.png|thumb|100px|P3]]
-|-
-|&nbsp;||Pin 1/2||Connect to 1.5 W loudspeaker.<br>Typical impedance: 8 Ω<br>Recommended impedance: 6-25 Ω.
-|-
-|&nbsp;||valign="top"|Pin 3/4||valign="top"|Internal NO relay contact for door lock control etc.
-|-
-|&nbsp;||valign="top"|Pin 5/6||valign="top"|Connect 24 VDC for station power if PoE is not used. Pin 6 is positive.
-|-
-|valign="top"|'''P4'''||valign="top" colspan="2"|6-pin plug-on screw terminal for external connections.||rowspan="5"|[[Image:IPmatrP4.jpg|thumb|80px|P4]]
-|-
-|&nbsp;||Pin 1/4||Input 1
-|-
-|&nbsp;||Pin 2/4||Input 2
-|-
-|&nbsp;||Pin 3/4||Input 3
-|-
-|&nbsp;||5/6||Station Led for vall message info.
-|-
-|}
-==Related Articles==
-* [[Gooseneck Microphone for IP Flush Master]]
-* [[Handset for IP Flush Master Station]]
-* [[Licenses#IP_station_license|IP Station License]]
-[[Category: Stations]]
+[[Category: INCA Stations]]
-[[Category: IP Stations]]
+[[Category: Discontinued Stations]]
-[[Category: Vandal Resistant Stations]]