Difference between revisions of "IP Video Door Station - 1401110200"
From Zenitel Wiki
(→Reset to factory settings) |
(→Related articles) |
||
| Line 51: | Line 51: | ||
== IP Station Configuration == | == IP Station Configuration == | ||
See article: [[IP_Station_Configuration#Configuration_in_IP-StationWeb|IP Station Configuration]] | See article: [[IP_Station_Configuration#Configuration_in_IP-StationWeb|IP Station Configuration]] | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
=Camera Configuration= | =Camera Configuration= | ||
Revision as of 08:45, 26 October 2016
Camera Type: Axis
Contents
Highlights
- Robust housing with Aluminium frontplate
- IP65 protection to front
- PoE Powered from one IP network cable
- IP HD Video camera BY AXIS
- Relay output for remote control, e.g. doors, signal lamps and gates
- Button with bi-colour LED ring
InterCom connections
Configuration
Software upgrade
- Software Upgrade
- CP Cam upgrade
LED Indications
Board Connectors
Dimensions
Reset to factory settings
Additional Documentation on Zenitel.com
Related articles
Installation
- Default IP adresses:
- Audio module: 169.254.1.100 (admin/alphaadmin)
- Camera module: 169.254.1.101 (admin/1234)
See article: IP Station Installation
IP Station Configuration
See article: IP Station Configuration
Camera Configuration
Connect to the camera using a webbrowser on default IP address 169.254.1.101.
In the menu that appears, click System Settings, and you will be asked to login:
Username: admin
Password: 1234
It is recommended to use a static IP address for the camera:
From the Main Menu navigate to Video Stream:
