Difference between revisions of "Manually Added Devices (Edge)"
From Zenitel Wiki
| Line 2: | Line 2: | ||
{{Cons}} | {{Cons}} | ||
The following devices are not automatically discovered by the Edge Controller, and must be manually added to the [[:category:IC-EDGE System|IC-EDGE System]]: | The following devices are not automatically discovered by the Edge Controller, and must be manually added to the [[:category:IC-EDGE System|IC-EDGE System]]: | ||
| − | |||
{| border="1" {{table}}} | {| border="1" {{table}}} | ||
| Line 19: | Line 18: | ||
| − | + | == Adding a new device == | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
When you add a new device, it will automatically be assigned a number and name, which can be modified as required. | When you add a new device, it will automatically be assigned a number and name, which can be modified as required. | ||
Revision as of 16:15, 29 March 2019
|
This article is under construction! |
The following devices are not automatically discovered by the Edge Controller, and must be manually added to the IC-EDGE System:
| Device | Device type | Comments |
| Turbine or INCA Stations on remote subnet | Vingtor-Stentofon Device | Vingtor-Stentofon Devices located on a different subnet than the Edge Controller are not automatically discovered by the Edge Controller, and must be manually added |
| ITSV-1 phone | Vingtor-Stentofon Device | License for 3rd party SIP telephone. One license per phone |
| 3rd party SIP devices | 3rd party SIP | Any 3rd party SIP device (SIP phone, softphone, SIP Speaker etc) must be manually added to the system |
| SIP Telephone gateways | Gateway | GSM telephone gateway and Analog telephone gateway s must be manually added. |
Adding a new device
When you add a new device, it will automatically be assigned a number and name, which can be modified as required.
- From Edge Controller > System Configuration > Directory, under the Manually Added Devices section, press the "+" button
- Select from the dropdown list the type of device you want to add
- Modify Number and Name as required
- Optionally one can add a SIP Password. If a password is entered, one have to also manually configure the same password in the device it self. The password is used for the registration proccess.
- Press Save to store the new device in the Edge Controller
|
Manually Added Devices must be configured by logging on to the device it self and do the neccessary settings |