Actions

Difference between revisions of "Message Formats (Sortable)"

From Zenitel Wiki
Line 7: Line 7:
 
| [[ABSENCE_STATUS]] || align=center |   || align=center | 0x002A || Response to SET_ABSENCE and GET_ABSENCE messages   
 
| [[ABSENCE_STATUS]] || align=center |   || align=center | 0x002A || Response to SET_ABSENCE and GET_ABSENCE messages   
 
|-
 
|-
−
|[[ALARM_MSG]] || align=center |$ALRM || align=center |0x0007 ||  
+
|[[ALARM_MSG]] || align=center |$ALRM || align=center |0x0007 || Set up (or disconnect) an ASVP Alarm message to a single station or a predefined group of stations
 +
|-
 +
|[[ALARM_MSG_ACK]]||align=center | ||align=center|0x0009 ||Positive response to ALARM_MSG
 +
|-
 +
|[[AUDIO_CH_DISCON]] || align=center |  || align=center |0x8012  || Disconnect a audio channel after loopback test 
 +
|-
 +
|[[AUDIO_CH_FAULTY ]] || align=center |  || align=center |0x8013  || Response to AUDIO_CH_LOOPBACK_REQ: Requested channel was faulty
 +
|-
 +
|[[AUDIO_CH_LOOPBACK_ACK]] || align=center |  || align=center |0x8011  ||Positive acknowledge of AUDIO_CH_LOOPBACK_REQ
 +
|-
 +
|[[AUDIO_CH_LOOPBACK_REQ ]] || align=center |$ALRM || align=center |0x8010  || Request for loopback audio connection. Used by the Audio Channel Testing process 
 +
|-
 +
|[[AUDIO_CH_TONE_REQ ]] || align=center |  || align=center |0x8015 || Request a peer exchange to put a 500Hz tone on a audio channel
 +
|-
 +
|[[AUDIO_DETECT ]] || align=center |$VOX || align=center |0x0053  || Triggers the event Simplex_Conference_Audio
 +
|-
 +
|[[AUDIO_LINK_NOT_AVAILABLE ]] || align=center |nbsp; || align=center |0x8006 || Response to AUDIO_PATH_SETUP from next node: Channel not granted
 +
|-
 +
|[[AUDIO_LINK_OK ]] || align=center |nbsp; || align=center |0x8003|| Response to AUDIO_PATH_SETUP. Channel number is OK
 +
|-
 +
|[[AUDIO_LINK_RELEASE ]] || align=center |  || align=center |0x8005 || Used to release audio path backwards stepwise from node to node when setup meets busy or faulty link
 +
|-
 +
|[[AUDIO_M_FEED_REQ ]] || align=center | || align=center |0x801A || Global Simplex Conference: Some station is pressing the M-key when participating in a conference
 +
|-
 +
|[[AUDIO_M_FEED_STOP ]] || align=center | || align=center |0x801B  || Global Simplex Conference: The station is releasing the M-key 
 +
|-
 +
|[[AUDIO_M_LINK_OK ]] || align=center |   || align=center |0x8019  || Per­ hop positive response to AUDIO_M_PATH_SETUP
 +
|-
 +
|[[AUDIO_M_PATH_BACKTRACK  ]] || align=center | || align=center |0x8018 || AUDIO_M_PATH_SETUP failed
 +
|-
 +
|[[AUDIO_M_PATH_OK ]] || align=center | || align=center |0x8017 || Contains statuses for an AUDIO_M_PATH_SETUP from one or more destination exchanges
 +
|-
 +
|[[AUDIO_M_PATH_SETUP ]] || align=center | || align=center |0x8016  || Communication in a multi-node network
 +
|-
 +
|[[AUDIO_PATH_CHECK_OK ]] || align=center | || align=center |0x800F || Positive response to CHECK_AUDIO_PATH
 +
|-
 +
|[[AUDIO_PATH_DELAY  ]] || align=center | || align=center |0x8007  || Set Duplex switch delay
 +
|-
 +
|[[AUDIO_PATH_DISCONNECT  ]] || align=center | || align=center |0x8006  || Release the end­to­end audio path. Normal disconnect from source or destination
 +
|-
 +
|[[AUDIO_PATH_OK ]] || align=center | || align=center |0x8002 || End to end message: Audio path is ready
 +
|-
 +
|[[AUDIO_PATH_SETUP  ]] || align=center | || align=center |0x8001 || Set up audio path between a source node and a destination node (possibly via transit nodes)
 +
|-
 +
|[[BUILD_GLOB_GRP ]] || align=center | || align=center |0x0070 || Broadcast message to all exchanges to make them rebuild global group indexes
 +
|-
 +
|[[C_KEY  ]] || align=center |$C|| align=center |0x0058  || Order station to press C-key 
 
|-
 
|-
 
| [[CALL_SETUP]] || align=center | $CALL || align=center | 0x0008 || Sets up a coversation between two users
 
| [[CALL_SETUP]] || align=center | $CALL || align=center | 0x0008 || Sets up a coversation between two users
 +
|-
 +
|[[CALL_STATUS_BC  ]] || align=center | || align=center |0x0040  ||Broadcast message telling the status of a call
 +
|-
 +
|[[CALL_TRANSFER ]] || align=center |$TRF || align=center |0x0044  || Set or remove call transfer for a station
 +
|-
 +
|[[CALL_TRANSFER_NOK  ]] || align=center | || align=center |0x0046 || Negative response to CALL_TRANSFER
 +
|-
 +
|[[CALL_TRANSFER_OK ]] || align=center | || align=center |0x0045  || Positive response to CALL_TRANSFER
 +
|-
 +
|[[CANCEL_MAIL ]] || align=center |$CANM|| align=center |0x0065 || Delete one or more mail/call request/alarm messages queued at a station
 +
|-
 +
|[[CHECK_AUDIO_PATH ]] || align=center | || align=center |0x800E || Check of established audio path at regular intervals
 +
|-
 +
|[[CLEAR_RCO ]] || align=center |$CLR|| align=center |0x0015  || Turn the given remote control output off
 +
|-
 +
|[[CLEAR_RCO_FAILED ]] || align=center | || align=center |0x0017  || Negative response to the CLEAR_RCO message
 +
|-
 +
|[[PULSE_RCO_OK ]] || align=center | || align=center |0x001C || Positive response to the PULSE_RCO message
 +
|-
 +
|[[COMMAND_RESPONSE ]] || align=center |nbsp; || align=center |0x0066 || General response message to messages
 +
|-
 +
|[[CONF_TALK ]] || align=center |$CONF_TALK|| align=center |0x008B  || Set Simplex conference speaker
 +
|-
 +
|[[CONF_TALK_STOP ]] || align=center | $CONF_TALK_STOP || align=center |0x008C  || Stop station form feeding Simplex conference
 +
|-
 +
|[[PROG_CONF  ]] || align=center |$CONF || align=center |0x0004 || Set Simplex conference for predefined group of stations or a single station
 +
|-
 +
|[[CONF_IS_ROOT ]] || align=center | || align=center |0x007B || Broadcast message. Sender informs that it is root of conference
 +
|-
 +
|[[CONF_JOIN]] || align=center | || align=center |0x0078  || Exchange wants to join conference, asks root-exchange to setup connection back to sender
 +
|-
 +
|[[CONF_MEMB_CHK ]] || align=center |nbsp; || align=center |0x0079 || Ask whether any neighbor exchange has any ordinary member left in conference
 +
|-
 +
|[[CONF_NOT_ROOT  ]] || align=center | || align=center |0x007C || Broadcast message. Sender informs that it is no longer root of conference
 +
|-
 +
|[[CONF_ORD_MEMB  ]] || align=center | || align=center |0x007A  || An exchange tells its neighbors that it has ordinary member left in conference
 +
|-
 +
|[[AUDIO_LINK_OK ]] || align=center |nbsp; || align=center |0x8003|| Response to AUDIO_PATH_SETUP. Channel number is OK
 +
|-
 +
|[[AUDIO_M_FEED_REQ ]] || align=center | || align=center |0x801A || Global Simplex Conference: Some station is pressing the M-key when participating in a conference
 +
|-
 +
|[[AUDIO_M_FEED_REQ ]] || align=center | || align=center |0x801A || Global Simplex Conference: Some station is pressing the M-key when participating in a conference
 +
|-
 +
|[[AUDIO_LINK_OK ]] || align=center |nbsp; || align=center |0x8003|| Response to AUDIO_PATH_SETUP. Channel number is OK
 +
|-
 +
|[[AUDIO_M_FEED_REQ ]] || align=center | || align=center |0x801A || Global Simplex Conference: Some station is pressing the M-key when participating in a conference
 +
|-
 +
|[[AUDIO_M_FEED_REQ ]] || align=center | || align=center |0x801A || Global Simplex Conference: Some station is pressing the M-key when participating in a conference
 +
|-
 +
|[[AUDIO_LINK_OK ]] || align=center |nbsp; || align=center |0x8003|| Response to AUDIO_PATH_SETUP. Channel number is OK
 +
|-
 +
|[[AUDIO_M_FEED_REQ ]] || align=center | || align=center |0x801A || Global Simplex Conference: Some station is pressing the M-key when participating in a conference
 +
|-
 +
|[[AUDIO_M_FEED_REQ ]] || align=center | || align=center |0x801A || Global Simplex Conference: Some station is pressing the M-key when participating in a conference
 +
|-
 +
|[[AUDIO_LINK_OK ]] || align=center |nbsp; || align=center |0x8003|| Response to AUDIO_PATH_SETUP. Channel number is OK
 
|-
 
|-
 
|}
 
|}

Revision as of 11:19, 25 June 2007

Message Short format Message id, Hex Description
ABSENCE_STATUS   0x002A Response to SET_ABSENCE and GET_ABSENCE messages
ALARM_MSG $ALRM 0x0007 Set up (or disconnect) an ASVP Alarm message to a single station or a predefined group of stations
ALARM_MSG_ACK   0x0009 Positive response to ALARM_MSG
AUDIO_CH_DISCON   0x8012 Disconnect a audio channel after loopback test
AUDIO_CH_FAULTY   0x8013 Response to AUDIO_CH_LOOPBACK_REQ: Requested channel was faulty
AUDIO_CH_LOOPBACK_ACK   0x8011 Positive acknowledge of AUDIO_CH_LOOPBACK_REQ
AUDIO_CH_LOOPBACK_REQ $ALRM 0x8010 Request for loopback audio connection. Used by the Audio Channel Testing process
AUDIO_CH_TONE_REQ   0x8015 Request a peer exchange to put a 500Hz tone on a audio channel
AUDIO_DETECT $VOX 0x0053 Triggers the event Simplex_Conference_Audio
AUDIO_LINK_NOT_AVAILABLE nbsp; 0x8006 Response to AUDIO_PATH_SETUP from next node: Channel not granted
AUDIO_LINK_OK nbsp; 0x8003 Response to AUDIO_PATH_SETUP. Channel number is OK
AUDIO_LINK_RELEASE   0x8005 Used to release audio path backwards stepwise from node to node when setup meets busy or faulty link
AUDIO_M_FEED_REQ   0x801A Global Simplex Conference: Some station is pressing the M-key when participating in a conference
AUDIO_M_FEED_STOP   0x801B Global Simplex Conference: The station is releasing the M-key
AUDIO_M_LINK_OK   0x8019 Per­ hop positive response to AUDIO_M_PATH_SETUP
AUDIO_M_PATH_BACKTRACK   0x8018 AUDIO_M_PATH_SETUP failed
AUDIO_M_PATH_OK   0x8017 Contains statuses for an AUDIO_M_PATH_SETUP from one or more destination exchanges
AUDIO_M_PATH_SETUP   0x8016 Communication in a multi-node network
AUDIO_PATH_CHECK_OK   0x800F Positive response to CHECK_AUDIO_PATH
AUDIO_PATH_DELAY   0x8007 Set Duplex switch delay
AUDIO_PATH_DISCONNECT   0x8006 Release the end­to­end audio path. Normal disconnect from source or destination
AUDIO_PATH_OK   0x8002 End to end message: Audio path is ready
AUDIO_PATH_SETUP   0x8001 Set up audio path between a source node and a destination node (possibly via transit nodes)
BUILD_GLOB_GRP   0x0070 Broadcast message to all exchanges to make them rebuild global group indexes
C_KEY $C 0x0058 Order station to press C-key
CALL_SETUP $CALL 0x0008 Sets up a coversation between two users
CALL_STATUS_BC   0x0040 Broadcast message telling the status of a call
CALL_TRANSFER $TRF 0x0044 Set or remove call transfer for a station
CALL_TRANSFER_NOK   0x0046 Negative response to CALL_TRANSFER
CALL_TRANSFER_OK   0x0045 Positive response to CALL_TRANSFER
CANCEL_MAIL $CANM 0x0065 Delete one or more mail/call request/alarm messages queued at a station
CHECK_AUDIO_PATH   0x800E Check of established audio path at regular intervals
CLEAR_RCO $CLR 0x0015 Turn the given remote control output off
CLEAR_RCO_FAILED   0x0017 Negative response to the CLEAR_RCO message
PULSE_RCO_OK   0x001C Positive response to the PULSE_RCO message
COMMAND_RESPONSE nbsp; 0x0066 General response message to messages
CONF_TALK $CONF_TALK 0x008B Set Simplex conference speaker
CONF_TALK_STOP $CONF_TALK_STOP 0x008C Stop station form feeding Simplex conference
PROG_CONF $CONF 0x0004 Set Simplex conference for predefined group of stations or a single station
CONF_IS_ROOT   0x007B Broadcast message. Sender informs that it is root of conference
CONF_JOIN   0x0078 Exchange wants to join conference, asks root-exchange to setup connection back to sender
CONF_MEMB_CHK nbsp; 0x0079 Ask whether any neighbor exchange has any ordinary member left in conference
CONF_NOT_ROOT   0x007C Broadcast message. Sender informs that it is no longer root of conference
CONF_ORD_MEMB   0x007A An exchange tells its neighbors that it has ordinary member left in conference
AUDIO_LINK_OK nbsp; 0x8003 Response to AUDIO_PATH_SETUP. Channel number is OK
AUDIO_M_FEED_REQ   0x801A Global Simplex Conference: Some station is pressing the M-key when participating in a conference
AUDIO_M_FEED_REQ   0x801A Global Simplex Conference: Some station is pressing the M-key when participating in a conference
AUDIO_LINK_OK nbsp; 0x8003 Response to AUDIO_PATH_SETUP. Channel number is OK
AUDIO_M_FEED_REQ   0x801A Global Simplex Conference: Some station is pressing the M-key when participating in a conference
AUDIO_M_FEED_REQ   0x801A Global Simplex Conference: Some station is pressing the M-key when participating in a conference
AUDIO_LINK_OK nbsp; 0x8003 Response to AUDIO_PATH_SETUP. Channel number is OK
AUDIO_M_FEED_REQ   0x801A Global Simplex Conference: Some station is pressing the M-key when participating in a conference
AUDIO_M_FEED_REQ   0x801A Global Simplex Conference: Some station is pressing the M-key when participating in a conference
AUDIO_LINK_OK nbsp; 0x8003 Response to AUDIO_PATH_SETUP. Channel number is OK



Retrieved from "https://wiki.zenitel.com/w/index.php?title=Message_Formats_(Sortable)&oldid=31986"