Difference between revisions of "SuperUser"
From Zenitel Wiki
| Line 3: | Line 3: | ||
* '''Faulty Board''' (If [[AMC-IP]] can no longer communicate with the board this error message is generated) | * '''Faulty Board''' (If [[AMC-IP]] can no longer communicate with the board this error message is generated) | ||
* '''Faulty Device''' ([[RIO]] or slave [[module]] communication failure) | * '''Faulty Device''' ([[RIO]] or slave [[module]] communication failure) | ||
| − | * '''Faulty AGA line''' ([[AlphaNet]] or [[MultiModule]] audio line error when | + | * '''Faulty AGA line''' ([[AlphaNet]] or [[MultiModule]] audio line error when interconnected by [[AGA]] or [[AE1]] board) |
The error reporting is configured from [[Exchange_%26_System_%28AlphaPro%29#Faults|Exchange & System -> RCI -> Faults]]. | The error reporting is configured from [[Exchange_%26_System_%28AlphaPro%29#Faults|Exchange & System -> RCI -> Faults]]. | ||
Revision as of 23:42, 1 September 2008
A SuperUser is a user with access to all features in the system. A SuperUser is assigned to Class of service 16. By default there is one SuperUser in an exchange, the station connected to physical number 1 (directory number 101). This station is also by default set to receive the following error messages generated by the system:
- Faulty Line (faulty station line, both analog and IP stations are reported)
- Faulty Board (If AMC-IP can no longer communicate with the board this error message is generated)
- Faulty Device (RIO or slave module communication failure)
- Faulty AGA line (AlphaNet or MultiModule audio line error when interconnected by AGA or AE1 board)
The error reporting is configured from Exchange & System -> RCI -> Faults.