Difference between revisions of "Unlock intercom station with password"

Revision as of 16:06, 30 April 2013

This article describes how a master station can be locked in idle, and unlocked by dialing a passcode (Event Trigger). When the code is dialed, the station will be unlocked for a preset periode of time, then it will automatically be locked.

In AlphaPro - Directory & Features, Insert a new event trigger directory number with feature number 85, e.g. 9200.

Create a passcode using feature 85. Here 9200 is used as passcode

In AlphaPro - COS, modify COS 2 to include feature 85 only.

Make feature 85 (event trigger) available in COS 2

Program two new event as described below.

Event 1 - Unlock the station by moving the station to COS 1 when dialing passcode 9980.

Event Owner:	Stations w/UDP, Id: 8 (All stations)
Event type:	15 – Event trigger
When change to:	ON
When related to:	Directory number, Id: 9980
Action:	$SSC L%1.dir U1
	$ST L%2.dir W100 L9980

Event 2 - After timeout, lock the station by moving it to COS 2.

Event Owner:	Stations w/UDP, Id: 8 (All stations)
Event type:	21 – Event timer
When change to:	ON
When related to:	Directory number, Id: 9980
Action:	$SSC L%1.dir U2

@@ Line 5: / Line 5: @@
 # In AlphaPro - COS, modify COS 2 to include feature 85 only.
 [[File:UnlockCOS2.PNG|thumb|right|300px|Make feature 85 (event trigger) available in COS 2]]
+# Program two new event as described below.
-==Solution==
-Directory number 9535 is by default a two-step event trigger, [[Event_Trigger_w/User_Parameter|feature 95/0]]. When 9535 + Substation is dialled, an [[Event_Trigger_with_parameter_%28Event_Type%29|event type 25]] is triggered and the action string [[SET_STATION_COS|$SSC L%2.dir U2]] moves the substation to [[COS]] 2. COS 2 is by default empty, which will prevent calls to be initiated. The command [[DISCON_ST|$DISCON_ST L%1.dir U2]] will disconnect the master station with a success tone after having entered the substation number. The [[PROGRAM|$PROG L%2.dir LV]] command will switch off audio program on the substation. The [[IND|IND %1.phy %1.dak(I%2.dir) 1 1 ON]] command will turn on the red LED in the DAK48 panel if a CRMIV or CRMV station is used. A 15 minute timer is started by the command [[SET_TIMER|$ST L%2.dir W9000 L9988]].
-When the timer expires it will trigger [[Event_Timeout_%28Event_Type%29|event type 21]], and the command [[SET_STATION_COS|$SSC L%1.dir U1]] will move the station back to COS 1, the [[IND|IND %1.phy %1.dak(I%2.dir) 1 1 OFF]] command will switch off the red LED, and calls and program selection can again be made.
 ---------------

Difference between revisions of "Unlock intercom station with password"

From Zenitel Wiki

Revision as of 16:06, 30 April 2013