Difference between revisions of "Unlock intercom station with password"
From Zenitel Wiki
| Line 9: | Line 9: | ||
--------------- | --------------- | ||
| − | '''Event 1''' - Unlock the station by moving the station to COS 1 when dialing passcode 9200. | + | '''Event 1''' - Unlock the station by moving the station to COS 1 when dialing passcode 9200. A 10,0 second timer is started. |
{| | {| | ||
|- | |- | ||
| Line 27: | Line 27: | ||
|} | |} | ||
| + | The parameter W100 = 10.0 seconds. Change if required. | ||
--------------- | --------------- | ||
Revision as of 16:10, 30 April 2013
This article describes how a master station can be locked in idle, and unlocked by dialing a passcode (Event Trigger). When the code is dialed, the station will be unlocked for a preset periode of time, then it will automatically be locked.
- In AlphaPro - Directory & Features, Insert a new event trigger directory number with feature number 85, e.g. 9200.
- In AlphaPro - COS, modify COS 2 to include feature 85 only.
- Program two new event as described below.
Event 1 - Unlock the station by moving the station to COS 1 when dialing passcode 9200. A 10,0 second timer is started.
| Event Owner: | Stations w/UDP, Id: 8 (All stations) |
| Event type: | 15 – Event trigger |
| When change to: | ON |
| When related to: | Directory number, Id: 9200 |
| Action: | $SSC L%1.dir U1 |
| $ST L%2.dir W100 L9200 |
The parameter W100 = 10.0 seconds. Change if required.
Event 2 - After timeout, lock the station by moving it to COS 2.
| Event Owner: | Stations w/UDP, Id: 8 (All stations) |
| Event type: | 21 – Event timer |
| When change to: | ON |
| When related to: | Directory number, Id: 9200 |
| Action: | $SSC L%1.dir U2 |