Unlock intercom station with password
From Zenitel Wiki
This article describes how a master station can be locked in idle, and unlocked by dialing a passcode (Event Trigger). When the code is dialed, the station will be unlocked for a preset periode of time, then it will automatically be locked.
- In AlphaPro - Directory & Features, Insert a new event trigger directory number with feature number 85, e.g. 9200.
- In AlphaPro - COS, modify COS 2 to include feature 85 only.
- Program two new events in the Event Handler.
In AlphaPro, select Exchange & System - > Events, and Insert two events with the following properties:
Event 1 - Unlock the station by moving the station to COS 1 when dialing passcode 9200. A 10,0 second timer is started.
Event Owner: | Stations w/UDP, Id: 8 (All stations) |
Event type: | 15 – Event trigger |
When change to: | ON |
When related to: | Directory number, Id: 9200 |
Action: | $SSC L%1.dir U1 |
$ST L%1.dir W100 L9200 |
The parameter W100 = 10.0 seconds. Change if required.
Event 2 - After timeout, lock the station by moving it to COS 2.
Event Owner: | Stations w/UDP, Id: 8 (All stations) |
Event type: | 21 – Event timer |
When change to: | ON |
When related to: | Directory number, Id: 9200 |
Action: | $SSC L%1.dir U2 |
Note that by default all stations are in COS 1, and thereby "Unlocked". To prevent that a SendAll from AlphaPro will "unlock" all stations, it is recommended to "lock" all stations by moving them to COS2 in the AlphaPro database.